Pretraživanje
Prikaz rezultata 31-40 od 1028
Modelling of industrial trickle-bed reactor for hydrotreating of gas oil and light cycle oil blends
(19th International Congress of Chemical and Process Engineering, CHISA 2010 and 7th European Congress of Chemical Engineering, ECCE-7, 2010)
Hydrotreating of middle distillates is one of the key processes in modern refining technology. Results of hydrotreating of gas oil and LCO blends, obtained in an industrial hydrotreater, are presented. Increasing temperature ...
Investigation of the Microstructure and Distribution of Solute During Solidification of Al-Cu Alloy
(Springer Science and Business Media LLC, 1999)
Phenomenon of solidification process plays an important role in various areas like: crystal growth, casting processes, liquid phase sintering etc. Results presented in this paper contribute to investigation of the influence ...
Speedup of Clos packet switches that provide delay guarantees
(IEEE, New York, 2005)
A multihop Clos fabric may provide the terabit capacity by using the smaller switching elements (SE). When the traffic load is balanced over the switches in a middle stage, all the traffic would get through the fabric, as ...
Enhanced Cell-ID+TA GSM positioning technique
(IEEE, New York, 2005)
The majority of existing GSM positioning techniques can be described as either costly or with limited performance. Basic GSM positioning techniques Cell-ID and Cell-ID+TA can be upgraded to decrease positioning error. We ...
Preparation of heterogeneous catalyst for biodiesel synthesis
(2007 AIChE Annual Meeting, 2007)
Certain disadvantages of conventional processes of biodiesel, e.g., fatty acid methyl esters (FAME) synthesis could be avoided by applying new technologies that are based on using heterogeneous catalyst. A new type of ...
Hardness response and adhesion of thin copper films on alloy substrates
(Belgrade: ETRAN – Society for electronics, telecommunication, computing, automatics and nuclear engineering, 2017)
Microhardness test is the most commonly used method for assessing the mechanical properties of thin films.This testing method uses controlled contact at a single point of an indenter and chosen material which induces the ...
Preparation of heterogeneous catalyst for biodlesel synthesis
(2007 AIChE Annual Meeting, 2007)
Certain disadvantages of conventional processes of biodiesel, i.e. fatty acid methyl esters (FAME) synthesis could be avoided by applying new technologies which are based on using heterogeneous catalyst. In this study a ...
Supercritical carbon dioxide extraction of essential oils and mathematical modelling on the micro-scale - General model
(CHISA 2006 - 17th International Congress of Chemical and Process Engineering, 2006)
General model for the supercritical carbon dioxide extraction of essential oils on the secretory structure scale (micro-scale) is presented in this study. The model containes Source and Transfer term which describes mass ...
Brewing by Immobilized Freeze Dried Cells in a Novel Gas Flow Bioreactor
(2008 Joint Central European Congress of the 4th Central European Congress on Food, CEFood 2008 and 6th Croatian Congress of Food Technologists, Biotechnologists and Nutritionists, 2008)
The aim of this study was to examine the novel gas-lift three phase bioreactor with external loop in beer fermentation by immobilized yeast cells on gluten pellets. Cells of Saccharomyces cerevisiae were immobilized on 40 ...
Design of the multicast controller for the high-capacity Internet router
(IEEE, New York, 2007)
High-capacity routers that circulate multicast packets have unique properties. Their architecture is non-blocking even for the multicast traffic. It also provides delay guarantees. This paper presents the detailed ...