Претраживање
Приказ резултата 11-18 од 18
Assessment of viscoelastic crack bridging toughening in refractory materials
(Elsevier Sci Ltd, Oxford, 2008)
Viscoelastic bridges can be formed in refractory ceramics while cooling from high temperatures. Such bridges can shield crack tips, thus reducing the effective crack tip stress intensity factors leading to higher resistance ...
Electrophoretic deposition of thin alumina films from water suspension
(Elsevier, Amsterdam, 2002)
Alumina water suspensions have been prepared for thin alumina film deposition on steel. The type and quantity of deflocculant have been determined using zeta potential and viscosimetric measurements. The deposition was ...
Influence of formation conditions and precursor viscosity on mean fiber diameter formed using the relating disk method
(Elsevier, Amsterdam, 2000)
Alumina ceramic fibers were produced from aluminum-hydroxidechloride based sol. Polyvinyl alcohol and surface active material were applied to adjust the rheological characteristics of the: sol. The rotating disk formation ...
The influence of the deposition parameters on the porosity of thin alumina films on steel / Uticaj parametara elektroforetskog taloženja praha aluminijum-oksida iz vodenih suspenzija na poroznost dobijenih tankih filmova na čeliku
(Serbian Chemical Society, Belgrade, 2004)
The influence of the deposition parameters on the porosity of thin alumina films electrophoretically deposited on steel from aqueous suspensions was investigated. The effects of the applied voltage, deposition time, ...
Image analysis of protective layer of zinc on steel obtained using the hot process / Analiza slike za karakterisanje zaštitnog sloja cinka na čeliku dobijenog toplim cinkovanjem
(Savez inženjera metalurgije Srbije, Beograd, 2003)
The procedure for measuring the thickness of anticorrosion protective layer of zinc on steel is given. The metallographic images are used for this measurement. Results are statistically handled and results are used to ...
The use of image analysis program for the determination of surface deterioration of refractory specimen during thermal shock / Korišćenje programa za analizu slike za određivanje stepena oštećenja vatrostalnog uzorka pri termošoku
(Društvo za ispitivanje i istraživanje materijala i konstrukcija Srbije, Beograd, 2006)
During examination of refractory specimen, one of the most important characteristics is their resistance to thermal shock. Standard method of testing is based on monitoring the surface shanging during thermal stability ...
Microstructural dependence of fracture toughness in high-strength 7000 forging alloys
(Pergamon-Elsevier Science Ltd, Oxford, 2008)
The effects of microstructural parameters associated with the coarse intermetallic phases particles and precipitates on the fracture toughness of the overaged 7000 alloy forgings are investigated. Detailed microstructural ...
The influences of multiscale-sized second-phase particles on fracture behaviour of overaged 7000 alloys
(Procedia Engineering, 2009)
To identify the most important parameters of multiscale microstructural features influencing the fracture modes and resistance to damage, detailed microstructural and fractographic analysis of overaged 7000 alloy plates ...