Search
Now showing items 1-10 of 17
Electrochemical and sorption characteristics of metacryloxypropyltrimethoxysilane coatings / Elektrohemijske i sorpcione karakteristike prevlaka metakriloksipropiltrimetoksisilana
(Engineering Society for Corrosion, Belgrade, Serbia, 2008)
The aim of this work was to investigate the influence of deposition parameters (silane solution concentration, deposition time, curing time) on electrochemical and sorption characteristics of metacryloxypropyltrimethoxysilane ...
Corrosion behavior of duplex polyaniline/epoxy coating on mild steel in 3% NaCl / Koroziono ponašanje dvoslojne polianilin/epoksidne prevlake na mekom čeliku u 3% rastvoru NaCl
(Association of Chemical Engineers of Serbia, 2005)
The corrosion behavior and thermal stability of epoxy coatings electrodeposited on mild steel and on mild steel with electrochemically deposited polyaniline (PANI) film were investigated by electrochemical impedance ...
Synthesis and electrochemical properties of polypyrrole, polyaniline and poly-3-methyl thiophene / Sinteza i elektrohemijska svojstva polipirola, polianilina i poli-3-metiltiofena
(Association of Chemical Engineers of Serbia, 2000)
In this article, the results of a study of the electrochemical polymerization of pyrrole and the chemical polymerization of pyrrole, aniline and 3-methyl thiophene initiated by FeCh are presented. The electrochemical ...
Epoxy coatings electrodeposited on aluminium and modified aluminium surfaces / Epoksidne kataforetske prevlake na aluminijumu i modifikovanim površinama aluminijuma
(Association of Chemical Engineers of Serbia, 2002)
The corrosion behaviour and thermal stability of epoxy coatings electrodeposited on modified aluminum surfaces (anodized, phosphatized and chromatized-phosphatized aluminium) were monitored during exposure to 3% NaCl ...
Corrosion protection of aluminum by vinyltriethoxysilane coatings / Koroziona stabilnost prevlaka viniltrietoksisilana
(Engineering Society for Corrosion, Belgrade, Serbia, 2008)
In this work the influence of the deposition parameters, i.e. silane solution concentration, deposition time and curing time on the corrosion stability of vinyltriethoxysilane (VTES) coatings on aluminum was investigated. ...
The adhesion of epoxy cataphoretic coating on phosphatized hot-dip galvanized steel / Adhezija epoksidne kataforetske prevlake na fosfatiranom pocinkovanom čeliku
(Association of Chemical Engineers of Serbia, 2006)
The influence of hot-dip galvanized steel surface pretreatment on the adhesion of epoxy cataphoretic coating was investigated. Phosphate coatings were deposited on hot-dip galvanized steel and the influence of fluoride ...
Protective properties of epoxy coatings electrodeposited on steel electrochemically modified by Zn-Fe alloys / Zaštitna svojstva epoksidnih kataforetskih prevlaka na čeliku elektrohemijski modifikovanom Zn-Fe legurama
(Association of Chemical Engineers of Serbia, 2004)
Epoxy coatings were electrodeposited on steel and steel modified by Zn-Fe alloys using the constant voltage method. Zn-Fe alloys were electrodeposited on steel at different current densities. The effect of the Zn-Fe alloy ...
Characterization of oxide coatings formed by plasma electrolytic oxidation of aluminum in sodium tungstate / Karakterizacija oksidnih slojeva dobijenih plazma elektrolitičkom oksidacijom aluminijuma u natrijum volframatu
(Engineering Society for Corrosion, Belgrade, Serbia, 2013)
This paper presents our recent research on morphology and phase composition of oxide coatings formed by plasma electrolytic oxidation of aluminum in 0.1 M sodium tungstate at constant current density of 15 mA/cm2 and ...
Savremeni čelici - dvojnikovanjem izazvana plastičnost
(DUZS - Društvo za unapređivanje zavarivanja u Srbiji, Beograd, 2014)
A significant increase in the research activity dedicated to high manganese TWIP steels has occurred during the past few years, motivated by the breakthrough combination of strength and ductility possessed by these alloys. ...
Laser cleaning of textile artifacts with metal threads: Process parameter optimization / Lasersko čišćenje tekstilnih eksponata sa korodiranim metalnim nitima - optimzacije parametara procesa
(Military Technical Institute, Belgrade, 2014)
This paper presents the results of the laser cleaning effects on textile samples with corroded metallic threads. In many museum collections, there are textile exhibits like uniforms, national costumes, flags and home ...