Претраживање
Приказ резултата 21-30 од 37
Examination of mechanical properties of acrilyc composite materials with different AL2O3 reinforcement by brazil test / Ispitivanje mehaničkih svojstava akrilatnih kompozitnih materijala sa različitim AL2O3 ojačanjima brazilskim testom
(Savez inženjera i tehničara Srbije, Beograd, 2019)
Composite materials based on UV-curing acrylates and various alumina-based reinforcements represent material that is suitable for the use in dentistry, but also in other areas. Composites were made using four different ...
Synthesis of α-Al2O3 based foams with improved properties as catalyst carriers
(Institute of Metals and Technology, 2014)
This paper explores the possibility of synthesising catalyst supports with improved properties. Alumina foams were produced with the polymer replication technique. Representative high- and low-temperature sintering ceramics ...
Mehanička svojstva hibridnog kompozita UHMWPE/EVA ojačanog vlaknima dobijenim elektropredenjem / Mechanical properties of UHMWPE/EVA hybrid composite reinforced with fibers obtained by electrospinning
(Savez inženjera i tehničara Srbije, 2018)
Aluminijum oksidna (Al2O3) nanovlakna pripremljena su iz vodenog rastvora aluminijum hlorohidrata/poli(vinil alkohola) (PVA) korišćenjem tehnike elektropredenja. Maseni odnos aluminijum hlorohidrata/PVA bio je 5:1. Nakon ...
Synthesis and characterization of semi-interpenetrating networks of chitosan and poly(N-vinyl-2-pyrrolidone) / Sinteza i karakterizacija semi-interpenetrirajućih mreža hitozana i poli(N-vinil-2-pirolidona)
(Association of Chemical Engineers of Serbia, 2010)
Semi-interpenetrating networks (semi-IPNs) based on chitosan and poly(N-vinyl-2-pyrrolidone) were prepared in order to achieve better mechanical properties. The samples were characterized by FTIR, SEM, DMA analysis and the ...
Age hardening potential of an Al-4.6 wt.% Mg alloy with Cu addition
(Belgrade : Institute of Technical Sciences of SASA, 2010)
The ageing behavior of an Al-4.6Mg-0.54Cu (in wt.%) alloy was studied after: (i) solution
treatment for 1h at 530°C, and (ii) annealing at 280°C for 3h. Both groups of the heat treated
specimens underwent further ...
Mechanical properties of two Al-Mg alloys manufactured by accumulative roll bonding (ARB) process
(Belgrade : Association of Metallurgical Engineers of Serbia (AMES), 2017)
The influence of alloying on the mechanical properties of AA5083 type Al-Mg
alloy sheets produced by accumulative roll bonding (ARB) process was studied.
Two investigated Al-Mg alloys: commercial AA5083 alloy with 4.2% ...
Influence of an accumulative roll bonding (ARB) process on the properties of AA5083 Al-Mg alloy sheets
(Association of Metallurgical Engineers of Serbia AMES, 2014)
In this study, fully annealed AA5083 type alloy sheets with 1 mm in thickness
were processed by accumulative roll bonding (ARB) at room temperature, up to 6 ARB
cycles. It was found that microstructure was refined and ...
Mechanical properties of composites based on unsaturated polyester resins obtained by chemical recycling of poly(ethylene terephthalate) / Mehanička svojstva kompozita na bazi nezasićenih poliestarskih smola dobijenih hemijskom reciklažom poli(etilen-tereftalata)
(Association of Chemical Engineers of Serbia, 2013)
Composites based on unsaturated polyester (UPe) resins and fumed silica AEROSIL® RY 50, NY 50, RX 50 and NAX 50, as well as graphite, TiO2 or organically modified clay CLOISITE 30B were prepared in order to investigate the ...
Mechanical and magnetic properties of composite materials with polymer matrix
(Technical Faculty, Bor, 2010)
Many of modern technologies require materials with unusual combinations of properties that cannot be met by the conventional metal alloys, ceramics, and polymeric materials. Material property combinations and ranges have ...
Titanium dioxide nanoparticles surface modified with imine as fillers for epoxy resin / Nanočestice titan-dioksida površinski modifikovane iminom kao punioci za epoksidnu smolu
(Univerzitet u Nišu - Tehnološki fakultet, Leskovac, 2018)
The surface of anatase TiO2 nanoparticles was modified with in situ synthesized imine, based on 3,4-dihydroxybenzaldehyde and octadecylamine. The modified TiO2 nanoparticles were investigated using FTIR and UV-Vis spectroscopy, ...