Претраживање
Приказ резултата 1-10 од 255
The critical apparent density for the free flow of copper powder / Kritična nasipna masa za tečenje praha bakra
(Serbian Chemical Society, 2003)
A method for the determination of the critical apparent density, which permits the free flow of electrodeposited copper powder is discussed. It was found that powders the apparent density of which were larger than 2.3 g/cm3 ...
Ethylene oxide removal by sorption on aluminium oxide / Uklanjanje etilen oksida sorpcijom na aluminijum oksidu
(Association of Chemical Engineers of Serbia, 2009)
The dynamics of ethylene oxide sorption and desorption on Al2O3 sorbent were investigated. The investigations of ethylene oxide sorption on Al2O3 show that significant sorption appeared above 125°C. The removal of sorbed ...
The current efficiency during the cathodic period of reversing current in copper powder deposition and the overall current efficiency / Iskorišćenje struje za vreme katodnog perioda reversne struje pri taloženju bakarnog praha i ukupno iskorišćenje struje
(Serbian Chemical Society, 2003)
The current efficiency during the cathodic period of reversing current in copper powder deposition was determined by measuring the quantity of hydrogen evolved. The diagrams from which the instantaneous and average current ...
Electrocatalytic properties and stability of titanium anodes activated by the inorganic sol-gel procedure / Titanske anode aktivirane oksidnom prevlakom dobijenom sol-gel postupkom
(Serbian Chemical Society, 2008)
The properties of activated titanium anodes, RuO2-TiO2/Ti and RuO2--TiO2-IrO2/Ti, prepared from oxide sols by the sol-gel procedure, are reviewed. RuO2 and TiO2 sols were synthesized by forced hydrolysis of the corresponding ...
Complex estimation of woven fabrics bending ability
(Niscair, 2007)
The bending ability of cotton, wool and viscose woven fabrics under the action of their own weight has been examined using the direct indicators by cantilever method, and indirect indicators by disc method. The results ...
Effect of temperature on the electrodeposition of disperse copper deposits / Uticaj temperature na elektrohemijsko taloženje disperznih taloga bakra
(Serbian Chemical Society, 2007)
The effect of temperature on the electrodeposition of copper at overpotentials belonging to the plateau of the limiting diffusion current density and higher was examined by the determination of the average current efficiency ...
Linear Free Energy Relationships of the C-13 NMR chemical shifts in 5-(3-and 4-substituted arylazo)-4,6-dimethyl-3-cyano-2-pyridones
(Arkat Usa Inc, Gainesville, 2009)
The C-13 NMR chemical shifts of the C2 carbon atom in the heteroaromatic nuclei of seventeen 5-(3- and 4-substituted arylazo)-4,6-dimethyl-3-cyano-2-pyridones were determined in deuterated DMSO solution. For quantitative ...
The structure directing role of 1,3-diaminopropane in the hydrothermal synthesis of iron(III) phosphate
(Srpsko hemijsko društvo, Beograd, 2004)
13-Diaminopropane (DAP) was used as a structure-directing agent for the hydrothermal synthesis of an organically templated iron phosphate. During crystallization at 180 degreesC, iron phosphate (FePO-DAP) with a layered ...
The apparent density as a function of the specific surface of copper powder and the shape of the particle size distribution curve
(Serbian Chemical Society, 2003)
The relation between the specific surface and apparent density of copper powders electrodeposited from acid copper sulphate solutions is established. It is shown that the apparent density is inversly proportional to the ...
The ionic equilibrium in the CuSO4-H2SO4-H2O system and the formation of the honeycomb-like structure during copper electrodeposition / Jonska ravnoteža u sistemu CuSO4-H2SO4-H2O i formiranje strukture pčelinjeg saća elektrohemijskim taloženjem bakra
(Serbian Chemical Society, 2008)
The ionic equilibrium of the species in the CuSO4-H2SO4-H2O system was employed to systematize the conditions of copper electrodeposition leading to the formation of the honeycomb-like structure. The reason why CuSO4 ...