Претраживање
Приказ резултата 1-10 од 19
Electrochemical deposition and characterization of Zn-Fe alloy coatings / Elektrohemijsko dobijanje i karakterizacija prevlaka legura cink-gvožđe
(Engineering Society for Corrosion, Belgrade, Serbia, 2003)
The influence of the deposition current density and temperature of deposition solution on the phase structure and corrosion properties of Zn-Fe alloys was examined. Alloys were deposited on a rotating disc electrode and ...
The influence of impurities and theirs removal in the electrochemical measurements / Uticaj nečistoća i njihovo uklanjanje u elektrohemijskim merenjima
(Engineering Society for Corrosion, Belgrade, Serbia, 2002)
In this paper the different kind of impurities which can have the influences on electrochemical (corrosion) measurements in the electrolytic solutions, as well as the methods of theirs removal, has been given.
Valorization of gallium from acidic zinc's liquor / Valorizacija galijuma iz kiselog cinkovog luga
(Engineering Society for Corrosion, Belgrade, Serbia, 2007)
In this paper are showed the results of valorisation of gallium, that is gallium salt gallium(III) chloride, GaCl3, by adsorption with chelate resin and then by extraction with 1, 5 mol/dm3 HCI to GaCl3. The efficiency of ...
The influence of electrochemically deposited zinc alloys on steel on the protective properties of cathaporetic epoxy coatings / Uticaj elektrohemijski taloženih legura cinka na čeliku na zaštitna svojstva epoksidne kataforetske prevlake
(Engineering Society for Corrosion, Belgrade, Serbia, 2005)
Prior to cathaporetic epoxy coating deposition steel surface was modified by chemical deposition of hot dip galvanized steel and by electrochemical deposition of zinc alloys with iron group of elements (Ni, Co and Fe). The ...
Korozija metala - šta je to?
(Engineering Society for Corrosion, Belgrade, Serbia, 2004)
Korozija materijala je opšte poznat i prihvaćen izraz, ali da li se baš tačno zna šta je korozija? Pod pojmom korozija materijala se podrazumeva svako neželjeno razaranje materijala kao posledice delovanja spoljne sredine. ...
Characterization of electrochemically synthesized pani on graphite electrode for potential use in electrochemical power sources / Elektrohemijska sinteza i karakterizacija elektrode od polianilina za potencijalnu upotrebu u elektrohemijskim izvorima energije
(Inženjersko društvo za koroziju, Beograd, 2009)
Polyaniline (PANI) on graphite electrode was synthesized electrochemically under galvanostatic condition at current density of 2.0 mA cm-2 from aqueous solution of 1.0 moldm-3 HCl and 0.25 mol dm-3 aniline monomer. ...
Characterization of electrochemically synthesized pani on graphite electrode for potential use in electrochemical power sources / Elektrohemijska sinteza i karakterizacija elektrode od polianilina za potencijalnu upotrebu u elektrohemijskim izvorima energije
(Engineering Society for Corrosion, Belgrade, Serbia, 2009)
Polyaniline (PANI) on graphite electrode was synthesized electrochemically under galvanostatic condition at current density of 2.0 mA cm-2 from aqueous solution of 1.0 moldm-3 HCl and 0.25 mol dm-3 aniline monomer. ...
The influence of hot-dip galvanized steel surface pretreatment on the adhesion of epoxy coating / Uticaj pripreme površine pocinkovanog čelika na adheziju epoksidne prevlake
(Engineering Society for Corrosion, Belgrade, Serbia, 2007)
The influence of hot-dip galvanized steel surface pretreatment on the adhesion of epoxy cataphoretic coating was investigated. Several passive films were formed on hot-dip galvanized steel (phosphate, chromate and oxide). ...
Electrochemical synthesis and corrosion behavior of thin polyaniline film on mild steel / Elektrohemijska sinteza i koroziono ponašanje tankih filmova polianilina na mekom čeliku
(Engineering Society for Corrosion, Belgrade, Serbia, 2003)
The electrochemical synthesis of polyaniline (PANI) on mild steel from the sodium-benzoate solutions has been investigated. It has been concluded that thin, highly adherent, polyaniline films could be obtained by anodic ...
Epoxy coatings electrodeposited on steel electrochemically modified by Zn-Co alloys / Epoksidne kataforetske prevlake na čeliku modifikovanom Zn-Co legurama
(Engineering Society for Corrosion, Belgrade, Serbia, 2003)
The corrosion behavior of epoxy coatings electrodeposited on steel and steel modified by Zn-Co alloys deposited from chloride and sulphate baths were investigated during exposure to 3 % NaCl. The electrochemical impedance ...