Pretraživanje
Prikaz rezultata 11-19 od 19
Electrochemical and sorption characteristics of metacryloxypropyltrimethoxysilane coatings / Elektrohemijske i sorpcione karakteristike prevlaka metakriloksipropiltrimetoksisilana
(Engineering Society for Corrosion, Belgrade, Serbia, 2008)
The aim of this work was to investigate the influence of deposition parameters (silane solution concentration, deposition time, curing time) on electrochemical and sorption characteristics of metacryloxypropyltrimethoxysilane ...
The influence of electrochemically deposited zinc alloys on steel on the protective properties of cathaporetic epoxy coatings / Uticaj elektrohemijski taloženih legura cinka na čeliku na zaštitna svojstva epoksidne kataforetske prevlake
(Engineering Society for Corrosion, Belgrade, Serbia, 2005)
Prior to cathaporetic epoxy coating deposition steel surface was modified by chemical deposition of hot dip galvanized steel and by electrochemical deposition of zinc alloys with iron group of elements (Ni, Co and Fe). The ...
Korozija metala - šta je to?
(Engineering Society for Corrosion, Belgrade, Serbia, 2004)
Korozija materijala je opšte poznat i prihvaćen izraz, ali da li se baš tačno zna šta je korozija? Pod pojmom korozija materijala se podrazumeva svako neželjeno razaranje materijala kao posledice delovanja spoljne sredine. ...
Electrochemical synthesis and corrosion behavior of thin polyaniline film on mild steel / Elektrohemijska sinteza i koroziono ponašanje tankih filmova polianilina na mekom čeliku
(Engineering Society for Corrosion, Belgrade, Serbia, 2003)
The electrochemical synthesis of polyaniline (PANI) on mild steel from the sodium-benzoate solutions has been investigated. It has been concluded that thin, highly adherent, polyaniline films could be obtained by anodic ...
The influence of impurities and theirs removal in the electrochemical measurements / Uticaj nečistoća i njihovo uklanjanje u elektrohemijskim merenjima
(Engineering Society for Corrosion, Belgrade, Serbia, 2002)
In this paper the different kind of impurities which can have the influences on electrochemical (corrosion) measurements in the electrolytic solutions, as well as the methods of theirs removal, has been given.
Investigation of the anodic behaviour of mild steel in different solutions as a base for the selection of suitable electrolyte for the synthesis of electro conducting polymer films / Ispitivanje anodnog ponašanja mekog čelika u različitim rastvorima u cilju izbora elektrolita za elektrohemijsku sintezu filmova elektroprovodnih polimera
(Engineering Society for Corrosion, Belgrade, Serbia, 2002)
In this paper the anodic behavior of mild steel in the different solutions of the organic and the inorganic electrolytes, with the aim to select the electrolyte for the electrochemical synthesis of electro conducting polymer ...
The influence of hot-dip galvanized steel surface pretreatment on the adhesion of epoxy coating / Uticaj pripreme površine pocinkovanog čelika na adheziju epoksidne prevlake
(Engineering Society for Corrosion, Belgrade, Serbia, 2007)
The influence of hot-dip galvanized steel surface pretreatment on the adhesion of epoxy cataphoretic coating was investigated. Several passive films were formed on hot-dip galvanized steel (phosphate, chromate and oxide). ...
Elektrohemijska oksidacija jodid-jona u vodenim rastvorima
(Engineering Society for Corrosion, Belgrade, Serbia, 2005)
The electrochemical reaction of iodine ions oxidation was investigated in order to estimate the optimal conditions for electrolysis. The anodic polarization curves were determined in solutions of different KI concentration: ...
Kinetic of corrosion reactions in acid and neutral solutions on electrochemically deposited Ni-W alloys / Kinetika korozionih reakcija u kiselim i neutralnim rastvorima na elektrohemijski taloženim legurama Ni-W
(Engineering Society for Corrosion, Belgrade, Serbia, 2006)
Ni-W alloys were electrochemically deposited from an ammonia-citrate electrolyte on rotating disc electrode with a gold disc, by direct and pulsating current. The corrosion potential and kinetics of cathodic and anodic ...