Претраживање
Приказ резултата 31-40 од 111
Corrosion behaviour of epoxy coatings electrodeposited on galvanized steel and steel modified by Zn-Ni alloys
(Elsevier Science Sa, Lausanne, 2000)
The electrochemical and transport properties and thermal stability of epoxy coatings electrodeposited on hot-dip galvanized steel and steel modified by Zn-Ni alloys were investigated during exposure to 3% NaCl solution. ...
Study of chlorination of nickel ferrite by gaseous chlorine and calcium chloride in the presence of active additives
(Wiley, Hoboken, 2000)
Thermodynamic analysis and experimental research of the chlorination of nickel ferrite (NiFe2O4) by gaseous chlorine in the presence of added C, BaS, S and NaCl in the temperature range from 300 to 900 degrees C are given ...
A new approach to the velocity field investigation in case of the entry flow in curved pipes with circular cross section
(Springer Wien, Wien, 2000)
In this paper an analysis of a laminar flow in a bend preceded by the straight section is presented. The flow is supposed to be unperturbed far upstream, while far downstream it becomes fully developed. In the vicinity of ...
The significance of molecular weight for medical purpose application of PLLA / Značaj molske mase za primenu PLLA u medicini
(Association of Chemical Engineers of Serbia, 2000)
The influence of the molecular weight of poly (L-lactide) on the properties important for biomedical application are reviewed. The utilization of polylactides in sutures, drug release systems and bone reconstruction is ...
Immobilization/encapsulation of cells using electrostatic droplet generation - Experiments and theory
(Minerva Biotecnologica, 2000)
The mechanism of alginate droplet formation as well as experimental parameters for producing very small polymer microbeads (i,e, less then 100 microns diameter) using an electrostatic droplet generator were investigated, ...
The structure of bright zinc coatings / Struktura sjajnih prevlaka cinka
(Serbian Chemical Society, 2000)
The structures of bright zinc coatings obtained from acid sulfate solutions in the presenceof dextrin/salicylaldehyde mixture were examined. It was shown by the STM technique that the surfaces of bright zinc coatings are ...
An inverse gas chromatography study of macroporous copolymers based on methyl and glycidyl methacrylate
(Elsevier, Amsterdam, 2000)
Adsorption properties of two laboratory synthesized macroporous copolymers based on methyl and glycidyl methacrylate were investigated by inverse gas chromatography. Retentions of 12 organic compounds were measured in the ...
The thermal degradation of poly(iso-butyl methacrylate) and poly(sec-butyl methacrylate) / Termička degradacija poli(iso-butil metakrilata) i poli(sec-butil metakrilata)
(Serbian Chemical Society, Belgrade, 2000)
The non-oxidative thermal degradation of poly(iso-butyl methacrylate) and poly(sec-butyl methacrylate) was investigated by studying changes in the polymer residue. Due to the different number of β-hydrogens in their ester ...
The effect of low-temperature plasma pretreatment on wool printing
(Amer Assoc Textile Chemists Colorists-Aatcc, Res Triangle Pk, 2000)
The application of radio-frequency capacitively coupled plasma for the treatment of wool was studied. The influence of plasma parameters on the printing and mechanical properties of wool was determined. Results after plasma ...
The thermal stability of poly(sec-butyl methacrylate) / Termička stabilnost poli(sec-butil metakrilata)
(Društvo inženjera plastičara i gumara, Beograd, 2000)
The thermal stability of a series of poly(sec-butyl methacrylate)(PsBMA) samples was investigated by non-isothermal thermogravimetry (TG). The PsBMA samples were synthesised by bulk radical polymerization in the presence ...