Претраживање
Приказ резултата 211-220 од 220
Oxidative modifications of cellulose in the periodate system - Reduction and beta-elimination reactions
(Walter de Gruyter & Co, Berlin, 2009)
The conversion of cellulose to dialdehyde cellulose (DAC) by treatment with aqueous periodate was studied by the CCOA method, which is a combination of gel permeation chromatography and carbonyl-selective fluorescence ...
Prediction of ductile fracture initiation using micromechanical analysis
(Pergamon-Elsevier Science Ltd, Oxford, 2004)
In the paper ductile fracture initiation analysis of low-alloyed ferritic steel has been made by application of two micromechanical models: the Rice-Tracey void growth model and the Gurson-Tvergaard-Needleman (GTN) model. ...
Kinetics of the hydrogen evolution reaction on Fe-Mo film deposited on mild steel support in alkaline solution
(Pergamon-Elsevier Science Ltd, Oxford, 2005)
The mechanism and kinetics of the hydrogen evolution reaction were studied. in 1.0 mol dm(-3) NaOH solution on Fe-Mo alloy electrodes prepared by electrodeposition at constant current densities from a pyrophosphate bath. ...
Modelling of ductile fracture initiation in strength mismatched welded joint
(Pergamon-Elsevier Science Ltd, Oxford, 2008)
In this paper, the effect of strength mismatch and width of the welded joints oil the stress-strain distribution in the crack tip region has been discussed. The single-edge notched bend (SENB) specimens (precrack length ...
Modeling of the substrate and product transfer coefficients for ethanol fermentation
(WILEY-VCH Verlag GmbH & Co., 2008)
The transfer phenomena of the substrate and product for ethanol fermentation with immobilized biocatalyst were investigated. Fermentation was carried out with a biocatalyst consisting of Ca-alginate gel in the form of ...
The evolution of structure induced by intensive milling in the system 2Bi 2 O 3 · 3TiO 2
(Elsevier, 2006)
Concurrent mechanochemical treatment of either a stoichiometric 2Bi 2 O 3 · 3TiO 2 powder mixture or (pulverized) Bi 4 Ti 3 O 12 compound was performed in a planetary ball mill. Relevant structural parameters: crystallite ...
Microstructure of LaNiO3 thin films obtained by the spin-on technique from citrate precursors
(Elsevier Sci Ltd, Oxford, 2008)
The morphology of perovskite LaNiO3 (LNO) thin films is a very important feature considering the fact that they could be used as an electrode material in ferroelectric devices. In this work, LNO films were prepared from ...
Mechanochemical synthesis of nanocrystalline titanium monoxide
(Elsevier, 2008)
Nanocrystalline cubic titanium monoxide, TiOx (0.92 < x < 1.19), with mean crystallite size of ≈ 6 nm, was synthesized by mechanochemical treatment of Ti and TiO2 (rutile) powder mixtures with molar ratios of 1:1, ...
A case study on the effect of thermal residual stresses on the crack-driving force in linear-elastic bimaterials
(Pergamon-Elsevier Science Ltd, Oxford, 2009)
The effect of thermal residual stresses in bimaterial structure with initial crack located near a sharp interface is discussed in this paper. Bimaterial compact tension (CT) specimen is used in the analysis, and the residual ...
Production of bioethanol from corn meal hydrolyzates
(Elsevier Sci Ltd, Oxford, 2006)
The two-step enzymatic hydrolysis of corn meal by commercially available a-amylase and glucoamylase and further ethanol fermentation of the obtained hydrolyzates by Saccharomyces cerevisiae yeast was studied. The conditions ...