Search
Now showing items 1-10 of 174
Characterisation of the nanotubular oxide layer formed on the ultrafine-grained titanium
(Savez inženjera metalurgije Srbije, Beograd, 2018)
Commercially pure titanium (cpTi) and titanium alloys are metallic implant materials usually used in dentistry and orthopaedics. In order to improve implant properties, Ti-based materials may be surface modified by different ...
Characterization of tantalum coatings deposited using vacuum plasma spray process / Karakterizacija tantal prevlake deponovane vakuum plazma sprej procesom
(Engineering Society for Corrosion, Belgrade, Serbia, 2018)
Tantalum is a very popular material for the industry as a whole because of very important characteristics such as: high melting point, significant thermal and electrical conductivity, high toughness and resistance to ...
Mechanical and structural features of Nb coating layers deposited on steel substrates in a vacuum chamber / Mehaničke i strukturne karakteristike slojeva prevlake Nb deponovane u vakuumu
(Engineering Society for Corrosion, Belgrade, Serbia, 2018)
In this paper analyzed was the influence of implementation of inert Ar gas and a mixture of inert plasma Ar / He gases in a vacuum chamber on the deposition of reactive niobium (Nb) powder. The aim of this paper was to ...
Effect of plasma hardfacing and carbides presence on the occurrence of cracks and microcracks
(Society for Structural Integrity and Life, Institute for Material Testing, 2018)
Presented is the effect of plasma hardfacing (or just hardfacing) and carbides presence on the occurrence of cracks and microcracks in the welded layer. The reasons behind this phenomenon are analysed and explained. In ...
Influence of defects on limit loads and integrity of the pipeline at hydropower plant 'Pirot'
(Society for Structural Integrity and Life, Institute for Material Testing, 2020)
Topic of this work is the integrity assessment of the pipeline section from hydropower plant Pirot. Crack-like defect size, maximum depth, is determined based on non-destructive evaluation - the largest crack depth is taken ...
Optimizing the thermal gradient and the pulling speed in a thermoplastic pultrusion process of pet/e glass fibers using finite element method
(Savez inženjera metalurgije Srbije, Beograd, 2018)
A thermoplastic pultrusion process was examined using commercial fiber roving of PET/E glass, to determine the optimum pulling speed and optimal zonal temperatures. Finite element analysis predicted heat transfer through ...
Nanotubular oxide layers formed on the ti-based implants surfaces-application and possible damages: a review
(Savez inženjera metalurgije Srbije, Beograd, 2018)
Implant surface properties define the interaction of the implant with the surrounding tissue. To obtained advanced biological, mechanical and physical properties, metallic implants are often exposed to different kinds of ...
Integrity assessment of vital beam components that enable conjoint operation of two bridge cranes
(Society for Structural Integrity and Life, Institute for Material Testing, 2018)
Vital components of the beam that enable conjoint operation of two bridge cranes are braces and threaded spindle. The beam connects two bridge cranes with overall lifting capacity of 500 t (2 x 250 t) and enables their ...
Micromechanical fracture analysis of laminated glass-epoxy composite material tested by bending / Mikromehanička analiza loma laminatnog staklo-epoksi kompozitnog materijala ispitivanog savijanjem
(Engineering Society for Corrosion, Belgrade, Serbia, 2014)
The object and purpose of this work is the micromechanical analysis of failures caused by mechanical tests of laminate glass-epoxy composite material in bending. The structure of glass-epoxy composite material is a glass ...
Contribution to the Serbian coal ranking and fly ash characterization using Pb isotopic ratio
(The Netherlands Press, 2022)
The Republic of Serbia generates the majority of its electricity at the thermal power plants (TE) Nikola Tesla, Kolubara, and Kostolac. Coal is extracted from the Kolubara basin, which produces approximately 70% of lignite ...