Pretraživanje
Prikaz rezultata 51-60 od 854
Thermal shock behavior of alumina based refractories / Comportamento allo shock termico di refrattari a base di allumina
(Ceramurgia, 2002)
Temperature difference and fracture resistance parameters have been used to predict the thermal shock behavior of alumina based commercial refractories with different content of Al 2 O 3 from 28% to 78%. Thermal and ...
Glycosaminoglycan deposition in engineered cartilage: Experiments and mathematical model
(Wiley-Blackwell, Malden, 2000)
Functional cartilaginous constructs for scientific research and eventual tissue repair were cultivated in bioreactors starting from chondrocytes immobilized on polymeric scaffolds. The scaffolds gradually degraded as the ...
Bi adsorption on Pt(111) in perchloric acid solution: A rotating ring-disk electrode and XPS study
(Royal Soc Chemistry, Cambridge, 2000)
The surface electrochemistry of reversibly and irreversibly adsorbed bismuth (Bi-ad) was studied on Pt(111) electrodes in 0.1 M HClO4. The valence state of irreversibly adsorbed Bi (Bi-ir) was determined by ex situ X-ray ...
Theoretical assessment of calcium arsenates stability: Application in the treatment of arsenic contaminated waste
(8th Conference of the Yugoslav Materials Research Society, 2007)
Several approaches for immobilization of arsenic (As) based on the transformation of its soluble forms (compounds) into highly insoluble arsenate apatite Ca5(AsO4)3 OH have been proposed. These immobilization techniques ...
Relationship between Mechanical Characteristics and Thermal Shock Behaviour of Alumina Based Refractories
(InterCeram: International Ceramic Review, 2003)
The thermal stability of the refractory material with the Al 2 O 3 content of 42 mass-% was investigated. Water quench tests (JUS.B.D8.319.) were carried out. The dynamic Young modulus of elasticity was calculated using ...
Influence of drying constant and diffusivity on clay drying behavior
(Techna Srl, Faenza, 2007)
The influence of the correlation between the drying constant and the diffusion coefficient of the liquid on the behavior of two raw materials for brick manufacturing during their drying process was examined. The test was ...
Thermal behaviour of mixed ligand Co(II), Ni(II) and Cu(II) complexes containing terephthalate ligands
(Elsevier, Amsterdam, 2004)
Thermal behaviour of a series of ternary Co(II), Ni(II) and Cu(II) complexes with terephthalate ion and some aromatic diamines has been studied by thermogravimetric and differential scanning calorimetric techniques. ...
Solids holdup and pressure drop in gas-flowing solids-fixed bed contactors
(Amer Chemical Soc, Washington, 2003)
Fundamentally based model for pressure drop in gas-flowing solids-fixed bed contactors is presented, together with a phenomenological semiempirical model for prediction of dynamic holdup. These simple models do not require ...
Immobilization of yeast cells in PVA particles for beer fermentation
(Elsevier Sci Ltd, Oxford, 2007)
In this study, the potential of application of non-aggressive LentiKat (R) technique for brewer's yeast immobilization on polyvinyl alcohol was assessed. High cell loads of about 109 cells/ml were achieved by this procedure ...
Determination of the protective properties of electrodeposited organic epoxy coatings on aluminium and modified aluminium surfaces
(Pergamon-Elsevier Science Ltd, Oxford, 2005)
The electrochemical and transport properties and thermal stability of epoxy coatings electrodeposited on aluminium and modified aluminium surfaces (anodized, phosphatized and chromatized-phosphatized aluminium) have been ...