Претраживање
Приказ резултата 831-840 од 854
Dynamic calibration of a sensor gas calorimeter for measurement of heat generation rates during kinetic of adsorption experiments
(Elsevier, Amsterdam, 2004)
A procedure for dynamic calibration of a sensor gas calorimeter, resulting with a calibration transfer function, instead with a calibration line, is presented. The main factors influencing the calibration transfer function ...
Enhanced Cell-ID+TA GSM positioning technique
(IEEE, New York, 2005)
The majority of existing GSM positioning techniques can be described as either costly or with limited performance. Basic GSM positioning techniques Cell-ID and Cell-ID+TA can be upgraded to decrease positioning error. We ...
Refining of corrosive insulating oils by selective liquid-liquid extraction process
(42nd International Conference on Large High Voltage Electric Systems 2008, CIGRE 2008, 2008)
In recent years copper sulphide formation in transformer windings has been recognized as one significant risk factor for operation of power transformers, due to number of failures which have occurred as a consequence of ...
Preparation of heterogeneous catalyst for biodlesel synthesis
(2007 AIChE Annual Meeting, 2007)
Certain disadvantages of conventional processes of biodiesel, i.e. fatty acid methyl esters (FAME) synthesis could be avoided by applying new technologies which are based on using heterogeneous catalyst. In this study a ...
Oxygen transport in tissue engineering systems: Cartilage and myocardium
(Fluid Dynamics and Materials Processing, 2007)
Efficient transport of oxygen is one of the main requirements in tissue engineering systems in order to avoid cell death in the inner tissue regions and support uniform tissue regeneration. In this paper, we review approaches ...
Study of chlorination of nickel ferrite by gaseous chlorine and calcium chloride in the presence of active additives
(Wiley, Hoboken, 2000)
Thermodynamic analysis and experimental research of the chlorination of nickel ferrite (NiFe2O4) by gaseous chlorine in the presence of added C, BaS, S and NaCl in the temperature range from 300 to 900 degrees C are given ...
Solids holdup and pressure drop in gas-flowing solids-fixed bed contactors
(Amer Chemical Soc, Washington, 2003)
Fundamentally based model for pressure drop in gas-flowing solids-fixed bed contactors is presented, together with a phenomenological semiempirical model for prediction of dynamic holdup. These simple models do not require ...
Principal component analysis of trace elements in industrial soils
(Springer Heidelberg, Heidelberg, 2004)
The concentrations of the elements Cr, Pb, Cd, Zn, Ni, Mn, Cu and As in soil samples from industrial areas in Serbia were studied. The complexity of the data of eight elements in fifty-nine soil samples was reduced by ...
Characterization of colloidal chromia particles obtained by forced hydrolysis
(Pergamon-Elsevier Science Ltd, Oxford, 2003)
Colloidal particles of chromia have been prepared by forced hydrolysis of an aqueous solution containing chromium chloride hexahydrate. At elevated temperature, a controlled addition of potassium hydroxide yielded colloidal ...
Synthesis and characterization of complexes between poly(itaconic acid) and poly(ethylene glycol)
(Springer, New York, 2004)
Interpolymer complexes of poly(itaconic acid) and poly(ethylene glycol) (PIA/PEG) were prepared by two different procedures: simple mixing of preformed PIA and PEG and by polymerization of itaconic acid on poly(ethylene ...