Претраживање
Приказ резултата 21-30 од 1772
Durability of sulfur concrete in various aggressive environments
(Elsevier Sci Ltd, Oxford, 2011)
Durability of sulfur concrete with different fillers, as well as Portland cement concrete, was tested in the solutions of HCl, H(2)SO(4), and NaCl. Regarding mass changes, in the solutions of HCl and H(2)SO(4) sulfur ...
Corrosion stability of cerium-doped cataphoretic epoxy coatings on AA6060 alloy
(Wiley-VCH Verlag Gmbh, Weinheim, 2016)
In this study, corrosion protection efficiency of undoped epoxy and epoxy coating doped with cerium on aluminum alloy AA6060 is evaluated over prolonged exposure to 3wt% NaCl solution by electrochemical impedance spectroscopy ...
Preparation of TiO2/carbon nanotubes photocatalysts: The influence of the method of oxidation of the carbon nanotubes on the photocatalytic activity of the nanocomposites
(Elsevier Sci Ltd, Oxford, 2012)
A method for the preparation of efficient TiO2/multi-wall carbon nanotubes nanocomposite photocatalysts by precipitation of anatase TiO2 nanoparticles onto differently oxidized carbon nanotubes is presented. The precursor ...
Multifunctional PES fabrics modified with colloidal Ag and TiO2 nanoparticles
(Wiley, Hoboken, 2011)
This study is aimed to highlight the possibility of engineering the multifunctional textile nanocomposite material based on the polyester (PES) fabric modified with colloidal Ag and TiO2 nanoparticles (NPs). The effects ...
Hemp Fibers: Old Fibers - New Applications
(Textiles: History, Properties and Performance and Applications, 2014)
Hemp (Cannabis sativa) was most likely the first plant cultivated by mankind for its textile use. Currently, the interest in hemp is focused on its use as a raw material for the production of environmentally friendly ...
Synthesis and characterization of porous tungsten carbide with added tungsten silicides
(Elsevier Sci Ltd, Oxford, 2018)
Porous materials made of commercial tungsten carbide (WC) with the addition of thermally obtained tungsten silicides (WSi2 and W5Si3) were made. The main research's contribution is firstly finding optimal conditions for ...
Application of an integrated supercritical extraction and impregnation process for incorporation of thyme extracts into different carriers
(Handbook on Supercritical Fluids: Fundamentals, Properties and Applications, 2014)
Supercritical carbon dioxide (sc2) is known as a good solvent for a wide range of bioactive compounds from natural sources. Extraction of bioactive compounds from plant material using sc2 is a favorable technique for ...
Precipitation of the beta-phase and corrosion behavior of an al-6.8 wt.% mg alloy
(John Wiley & Sons, Chichester, 2012)
This study was performed on the Al-Mg alloy with the chemical composition: Al-Mg6.8-Mn0.51-Fe0.2-Si0.1. As-received cold rolled material (O-temper) was subjected to (i) cold rolling and annealing at 265 degrees C and 320 ...
Exchange-Bias and Grain-Surface Relaxations in Nanostructured NiO/Ni Induced by a Particle Size Reduction
(Amer Chemical Soc, Washington, 2012)
Transition-metal-oxide/transition-metal nanocomposites, such as NiO/Ni, FeO/Fe, and CoO/Co, have been the subject of much recent investigation (i) because of their potential applications and (ii) because they are good model ...
Influence of Chemically Modified Short Hemp Fiber Structure on Biosorption Process of Zn2+ Ions from Waste Water
(Korean Fiber Soc, Seoul, 2014)
Short hemp fibers, acquired as a waste from textile industry, were used as an efficient biosorbent for removal of zinc ions from polluted water. In order to obtain the material with better sorption properties, short hemp ...