Search
Now showing items 11-20 of 79
Influence of the electrode parameters on the pulse shape characteristic at small pressure and inter-electrode gap values
(IEEE Conference Record - Abstracts: The 31st IEEE International Conference on Plasma Science, ICOPS2004, 2004)
Gas filled surge arresters (GFSA) has working point close to minimum on Paschen curve. Below that point breakdown follows Townsend's mechanism, i.e. the secondary processes on the electrodes dominate the secondary processes ...
Preparation and properties of polymeric and composite bioresorbable barrier membranes
(Trans Tech Publications Ltd, Durnten-Zurich, 2004)
Bioresorbable barrier membranes have been widely used in dentistry and maxillofacial surgery. When the membranes are placed over bony defects and are closely adapted by the surrounding bone face, an environment that prevents ...
Pertraction of phenol in hollow-fiber membrane contactors
(Elsevier, Amsterdam, 2004)
In this paper the multistage membrane pertraction (simultaneous extraction and reextraction) of phenol with linear monoalkyl cyclohexane (IMACH) as a carrier and sodium hydroxide solution as a strip, in laboratory scaled ...
Synthesis and characterization of complexes between poly(itaconic acid) and poly(ethylene glycol)
(Springer, New York, 2004)
Interpolymer complexes of poly(itaconic acid) and poly(ethylene glycol) (PIA/PEG) were prepared by two different procedures: simple mixing of preformed PIA and PEG and by polymerization of itaconic acid on poly(ethylene ...
Metal sorption on macroporous poly(GMA-co-EGDMA) modified with ethylene diamine
(Elsevier Science Bv, Amsterdam, 2004)
Two samples of macroporous crosslinked poly(glycidyl methacrylate-co-ethylene glycol dimethacrylate), poly(GMA-co-EGDMA), with different porosity parameters were synthesized by suspension copolymerization and modified by ...
Dynamic calibration of a sensor gas calorimeter for measurement of heat generation rates during kinetic of adsorption experiments
(Elsevier, Amsterdam, 2004)
A procedure for dynamic calibration of a sensor gas calorimeter, resulting with a calibration transfer function, instead with a calibration line, is presented. The main factors influencing the calibration transfer function ...
Electrophoretic deposition of boehmite coatings on titanium from aqueous sols
(Trans Tech Publications Ltd, Durnten-Zurich, 2004)
The electrophoretic deposition from sots and colloidal suspensions of ceramic powders has many advantages over conventional ceramic powder processing methods. In this way it is possible to control the thickness and ...
Fatigue damage detection in composite rods using fiber optic intensity based sensors
(Trans Tech Publications Ltd, Durnten-Zurich, 2004)
An application of the embedded intensity based fiber optic sensors (FOS) for fatigue damage detection in cantilevered composite rods is presented. During the fatigue test with constant amplitude of oscillations, the ...
Chain conformational statistics and mechanical properties of elastomer composites
(Progress in Advanced Materials and Processes: Proceedings of the Fifth Jugoslav Materials Research Society, YUCOMAT V, 2004)
A new equation of state for elastomer network under constrains due to fillers has been proposed and verified for two most common and industry important rubbers, natural rubber and styrene-butadiene rubber. A series of ...
Efficiency of membrane extraction of phenol-4-aminoantipyrine complex with n-alcohols
(Elsevier, Amsterdam, 2004)
In this study, the membrane extraction of phenol-4-aminoantipyrine complex with the series of aliphatic alcohols was investigated by monitoring the efficiency of the process. A commercial polysulphone hollow-fiber membrane ...