Претраживање
Приказ резултата 41-50 од 79
Fatigue damage detection in composite rods using fiber optic intensity based sensors
(Trans Tech Publications Ltd, Durnten-Zurich, 2004)
An application of the embedded intensity based fiber optic sensors (FOS) for fatigue damage detection in cantilevered composite rods is presented. During the fatigue test with constant amplitude of oscillations, the ...
Support of laboratory accreditation in Central and Eastern Europe by preliminary assessment
(Springer-Verlag, 2004)
The development of a competent and reliable network of accredited laboratories represents one, among other, important means of removal of technical barriers to trade. The achievement of the goal "tested once-accepted ...
Structural analysis of abrasive composite materials with nonwoven textile matrix
(Elsevier B.V., 2004)
The goal of this research was to design the novel composite material based on nonwoven textile material (NTM) while using the existing production facilities. The chosen product was abrasive composite material with nonwoven ...
Nanostructured sodium niobate obtained by glass crystallization
(Elsevier Science Sa, Lausanne, 2004)
The subject of this work was to obtain nanostructured sodium niobate crystals by a controlled crystallization method from glasses. The glass samples of the composition within the system NaNbO3-SiO2-Al2O3 were prepared by ...
Semi-interpenetrating polymer networks composed of poly(N-isopropyl acrylamide) and polyacrylamide hydrogels
(John Wiley and Sons Inc., 2004)
Three series of semi-interpenetrating polymer networks, baaed on crosslinked poly(N-isopropyl acrylamide) (PNIPA) and 1 wt % nonionic or ionic (cationic and anionic) linear polyacrylamide (PAAm), were synthesized to improve ...
Methyl methacrylate and acrylamide crosslinked macroporous copolymers
(Journal of Applied Polymer Science, 2004)
In this work the synthesis of a crosslinked macroporous copolymer was effected from methyl methacrylate and acrylamide. The synthesis process began with emulsion prepolymerization, followed by sol-gel copolymerization until ...
Influence of the common varistor dopants (CoO, Cr2O3 and Nb2O5) on the structural properties of SnO2 ceramics
(Elsevier Science Inc, New York, 2004)
The influence of dopants commonly used in SnO2 varistor ceramics, such as CoO, Cr2O3 or Nb2O5, on the structural properties of SnO2 was investigated. Several SnO2-based ceramics containing only one of the dopants were ...
Dielectric and piezoelectric properties of the mechanochemically prepared PZT ceramics
(Kluwer Academic Publishers, 2004)
Mechanochemical synthesis was applied to obtain nanocrystalline powders of composition Pb(Zr0.52Ti0.48)O-3 (PZT). Milling was performed in a planetary ball mill using vials and balls made of zirconia or steel-in order to ...
Electrochemically deposited Ni+WC composite coatings obtained under constant and pulsating current regimes
(Netherlands : Kluwer Academic Publishers, 2004)
A series of Ni+WC composite coatings were obtained by electrodeposition on a rotating disc electrode (RDE)from a commercially available Watts bath containing additives for brightness and smoothing and insoluble WCparticles, ...