Претраживање
Приказ резултата 1-10 од 69
Corrosion behaviour of epoxy coatings investigated by EIS
(Trans Tech Publications Ltd, Durnten-Zurich, 1998)
Epoxy coatings were formed by cathodic electrodeposition of an epoxy resin on steel and on electrochemically modified steel surface by Fe-P alloy using constant voltage method (resin concentration 10 wt.%, temperature 26 ...
Epoxy coatings electrodeposited on aluminium and modified aluminium surfaces / Epoksidne kataforetske prevlake na aluminijumu i modifikovanim površinama aluminijuma
(Association of Chemical Engineers of Serbia, 2002)
The corrosion behaviour and thermal stability of epoxy coatings electrodeposited on modified aluminum surfaces (anodized, phosphatized and chromatized-phosphatized aluminium) were monitored during exposure to 3% NaCl ...
Electrodeposition and characterization of Zn-Ni alloys as sublayers for epoxy coating deposition
(Springer, Dordrecht, 2001)
The chemical composition and phase structure of Zn-Ni alloys obtained by electrodeposition under various conditions were investigated. The influence of the deposition solution and deposition current density on the composition, ...
Effect of surface modification by Fe-P alloys on corrosion behaviour of epoxy coatings electrodeposited on steel
(Bulletin of Electrochemistry, 2001)
Corrosion behaviour of electrodeposited epoxy coatings on electrochemically modified steel surface by Fe-P alloys of different chemical and phase structures has been investigated by exposure to 3% NaCl. The electrochemical ...
Corrosion studies of magnesium, aluminum and zinc in citrate containing electrolytes
(Nice : International Society of Electrochemistry, 2010)
Corrosion behavior of magnesium, aluminum and zinc in 0.2 mol dm-3 NH4Cl; 0.1 mol dm-3 NH4Cl with addition of 0.1 mol dm-3 Na-citrate and corrosion behavior of zinc in 0.3 mol dm-3 NH4Cl with addition of 0.8 mol dm-3 ...
Electrochemical synthesis and corrosion behavior of thin polyaniline-benzoate film on mild steel
(Elsevier Science Sa, Lausanne, 2004)
The electrochemical synthesis and corrosion behavior of polyaniline (PANI) on mild steel from sodium-benzoate solutions were investigated. Thin, adherent, polyaniline films were obtained by anodic oxidation with current ...
Corrosion stability of cerium-doped cataphoretic epoxy coatings on AA6060 alloy
(Wiley-VCH Verlag Gmbh, Weinheim, 2016)
In this study, corrosion protection efficiency of undoped epoxy and epoxy coating doped with cerium on aluminum alloy AA6060 is evaluated over prolonged exposure to 3wt% NaCl solution by electrochemical impedance spectroscopy ...
Corrosion protection of aluminum by vinyltriethoxysilane coatings / Koroziona stabilnost prevlaka viniltrietoksisilana
(Engineering Society for Corrosion, Belgrade, Serbia, 2008)
In this work the influence of the deposition parameters, i.e. silane solution concentration, deposition time and curing time on the corrosion stability of vinyltriethoxysilane (VTES) coatings on aluminum was investigated. ...
The adhesion of epoxy cataphoretic coating on phosphatized hot-dip galvanized steel / Adhezija epoksidne kataforetske prevlake na fosfatiranom pocinkovanom čeliku
(Association of Chemical Engineers of Serbia, 2006)
The influence of hot-dip galvanized steel surface pretreatment on the adhesion of epoxy cataphoretic coating was investigated. Phosphate coatings were deposited on hot-dip galvanized steel and the influence of fluoride ...
Electrochemical deposition and characterization of zinc-nickel alloys deposited by direct and reverse current / Elektrohemijsko taloženje i karakterizacija legura cink-nikal dobijenih konstantnom i reversnom strujom
(Serbian Chemical Society, Belgrade, 2005)
Zn-Ni alloys electrochemically deposited on steel under various deposition conditions were investigated. The alloys were deposited on a rotating disc electrode and on a steel panel from chloride solutions by direct and ...