Претраживање
Приказ резултата 1-10 од 45
Poly[(N-isopropylacrylamide)-co-(itaconic acid)] hydrogels with poly(ethylene glycol)
(Wiley, Hoboken, 2010)
The aim of the work reported here was to investigate temperature- and pH-sensitive hydrogels of N-isopropylacrylamide (NIPAM) and itaconic acid (IA) and their semi-interpenetrating polymer networks (semi-IPNs) with varying ...
Mechanical properties of biomorphic silicon carbide ceramics
(International Institute for the Science of Sintering, Beograd, 2011)
Biomorphous β-SiC ceramics were produced from linden wood by impregnation with tetraethyl orthosilicate (TEOS), followed pyrolysis and high temperature treatment at 1580°C. Six specimen groups included charcoal and five ...
Mechanical properties correlation to processing parameters for advanced alumina based refractories
(International Institute for the Science of Sintering, Beograd, 2012)
Alumina based refractories are usually used in metallurgical furnaces and their thermal shock resistance is of great importance. In order to improve thermal shock resistance and mechanical properties of alumina based ...
Cavitation resistance of composite polyester resin/basalt powder
(Society for Structural Integrity and Life, Institute for Material Testing, 2019)
The paper presents the results of research on cavitation resistance of the composite based on unsaturated polyester resin and basalt powder, as reinforcement. Basalt powder was obtained by grinding and micronising basaltic ...
Improvement of the mechanical properties of spark plasma sintered hap bioceramics by decreasing the grain size and by adding multi-walled carbon nanotubes
(International Institute for the Science of Sintering, Beograd, 2013)
Composites based on HAP and oxidized multi-walled carbon nanotubes (o-MWCNT) and monophase HAP materials were processed by spark plasma sintering. Starting from stoichiometric nano-sized HAP powder, monophase bioceramics ...
Development and characterization of thermosensitive hydrogels based on poly(N-isopropylacrylamide) and calcium alginate
(Wiley, Hoboken, 2012)
This work refers to the synthesis and characterization of thermosensitive hydrogels based on interpenetrating polymer networks (IPNs) of poly(N-isopropylacrylamide) (PNIPAAm) and calcium alginate in the form of films. The ...
Dynamic mechanical properties of aramid fabrics impregnated with multiwalled carbon nanotubes / Dinamičko mehanička svojstva aramidnih lamina impregnisanih sa višeslojnim ugljeničnim nanocevima
(Engineering Society for Corrosion, Belgrade, Serbia, 2013)
Carbon nanotubes (CNT) represent allotropes of carbon with a cylindrical nanostructure. In multiwalled carbon nanotubes (MWCNT), graphitic layers make up concentric tubes. The multiwalled nanotubes length in our research ...
Structure and properties of Al-Mg alloy sheets produced by accumulative roll bonding. / Struktura i svojstva višeslojnih Al-Mg traka dobijenih hladnim valjanjem
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2018)
Influence of accumulative roll bonding (ARB) and conventional cold rolling (CR) on the mechanical and corrosion properties of an AA5083 type alloy with 4.2 wt% Mg and a modified alloy with 5.1 wt% Mg and addition of 0.5 ...
Effect of surface modified TiO2 nanoparticles on thermal, barrier and mechanical properties of long oil alkyd resin-based coatings
(Budapest Univ Technol & Econ, Budapest, 2015)
Novel soy alkyd-based nanocomposites (NCs) were prepared using TiO2 nanoparticles (NPs) surface modified with different gallates, and for the first time with imine obtained from 3,4-dihydroxybenzaldehyde and oleylamine ...
Synthesis and characterisation of hybrid polymer composite materials based on wood. / Sinteza i karakterizacija hibridnih polimernih kompozita na bazi drveta
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2019)
The focus of this doctoral dissertation is the preparation and characterization of wood-plastic composites (WPC), whereby a new method of obtaining hybrid polymer composites based on wood from solution and forming the final ...