Search
Now showing items 1-10 of 173
The modification of the polyester knitted fabric for more economic dyeing / Modifikacija poliestarske pletenine za ekonomičnije bojenje
(Univerzitet u Nišu - Tehnološki fakultet, Leskovac, 2017)
This article discusses the process of modification of the polyester knitted fabric as a prerequisite for successful dyeing at a lower temperature and without the presence of the carrier. The processing preceding dyeing, ...
Analysis of fracture behaviour of thin s316l stainless steel plates
(Institut za ispitivanje materijala, Beograd, 2017)
In this paper are presented experimental analyses of the behaviour of 316L stainless steel in regard to fracture, according to standard methods of investigation on modified tensile C(T) specimens. The S316L alloy is selected ...
Metallothermic reduction in recycling technologies applied to the metallurgical byproducts and wastes / Metalotermijska redukcija u reciklažnim tehnologijama primenjena na metalurške međuproizvode i otpade
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2017)
In the most cases metallurgical processes are very complex, therefore formation of by-products and hazardous waste are inevitable. Simulating the reactions in a complex system can lead to self-sustaining and energy efficient ...
Estimation of the exchange current density and comparative analysis of morphology of electrochemically produced lead and zinc deposits
(Serbian Chemical Society, 2017)
The processes of lead and zinc electrodeposition from the very dilute electrolytes were compared by the analysis of polarization characteristics and by the scanning electron microscopic (SEM) analysis of the morphology of ...
Corrosion behavior of nanotubular oxide layer formed on titanium and Ti-13Nb-13Zr alloy processed by high pressure torsion
(Materials Research Society of Srebia, 2017)
The good corrosion resistance is crucial for implant biomaterials application, because the metallic ion release from the implant to the surrounding tissue may give rise to biocompatibility problems. In order to optimize ...
In situ synthesis of Cu/Cu2O nanoparticles on the TEMPO oxidized cotton fabric / In situ sinteza Cu/Cu2O nanočestica na TEMPO oksidovanoj pamučnoj tkanini
(Beograd : Serbian Chemical Society, 2017)
Recent breakthrough in nanotechnologies had large impact on research in the field of medical textiles. So far many efforts have been made to fabricate antimicrobial textile materials with incorporated metal (Ag, Cu) and ...
Electrochemical behavior of anodic Ti-13Nb-13Zr oxide nanotubes in simulated body fluid
(Srpsko hemijsko društvo / Serbian Chemical Society, 2017)
U radu su ispitivane legure titana Ti-13Nb-13Zr (u polaznom stanju, CG, i nakon HPT obrade, eng.
high pressure torsion, UFG), kao potencijalnih biomaterijala. Legure su modifikovane formiranjem
nanotubularnih oksidnih ...
Enhanced photocatalytic degradation of RO16 dye using Ag modified ZnO nanopowders prepared by the solvothermal method
(Univerzitet u Novom Sadu - Tehnološki fakultet, Novi Sad, 2017)
In this work, Zn(CH3 COO)(2) 2 H-2 O with AgNO3 content from 0 to 6 mol% was solvothermally treated at 120 C for 18 h in the presence of poly(vinyl pyrrolidone), ethylene glycol and sodium hydroxide. The structural , ...
Fracture mechanics analysis of heterogeneous cylindrical structures using pipe-ring notched bend specimens
(SRPSKO društvo za mehaniku, 2017)
Mechanical properties of two Al-Mg alloys manufactured by accumulative roll bonding (ARB) process
(Belgrade : Association of Metallurgical Engineers of Serbia (AMES), 2017)
The influence of alloying on the mechanical properties of AA5083 type Al-Mg
alloy sheets produced by accumulative roll bonding (ARB) process was studied.
Two investigated Al-Mg alloys: commercial AA5083 alloy with 4.2% ...