Претраживање
Приказ резултата 1-10 од 700
Laser surface modification of metallic implant materials / Laserska površinska modifikacija metalnih implantantnih materijala
(Serbian Medical Society, 2019)
Metallic biomaterials are most commonly used as hard-tissue replacements because of their favorable mechanical features and excellent biocompatibility. The objective of this paper is to present an overview of diverse surface ...
Properties of Zig-Zag Nickel Nanostructures Obtained by GLAD Technique
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2016)
Zig-zag structure of the nickel thin film has been obtained using Glancing Angle Deposition (GLAD) technique. Glass substrate was positioned 75 degrees with respect to the substrate normal. The obtained nickel thin film ...
Influence of Chitosan Coating on Mechanical Stability of Biopolymer Carriers with Probiotic Starter Culture in Fermented Whey Beverages
(Hindawi Ltd, London, 2015)
The aim of this study was to improve the mechanical stability of biopolymer carriers and cell viability with addition of chitosan coating during fermentation process and product storage. Dairy starter culture (1% (w/v)) ...
Impact of carrier material on fermentative activity of encapsulated yoghurt culture in whey based substrate
(Savez hemijskih inženjera, Beograd, 2017)
The main objectives of this paper were to study the influence of the carrier material used for encapsulation and of bead size to fermentative activity and viability of the dairy starter culture Lactoferm ABY 6. Encapsulation ...
High Activity and Stability of Pt2Bi Catalyst in Formic Acid Oxidation
(Springer, New York, 2012)
Formic acid oxidation was studied on a new prepared Pt2Bi characterized by X-ray diffraction spectroscopy (phase composition), scanning tunneling microscopy (STM) (surface morphology), and COads stripping voltammetry ...
Određivanje efektivnog koeficijenta difuzije prilikom sušenja uzoraka od gline / Calculation of the effective diffusion coefficient during the drying of clay samples
(Srpsko hemijsko društvo, Beograd, 2012)
Cilj ovog rada je da se na primeru dve opekarske gline sa različitih lokaliteta odredi efektivni koeficijenat difuzije na osnovu eksperimentalno snimljenih krivih sušenja. Razvijen je metod i napravljena su dva kompjuterska ...
Thermal stability and degradation of Co(II), Cd(II), and Zn(II) complexes with N-benzyloxycarbonylglycinato ligand
(Springer, Dordrecht, 2010)
Thermal behavior of Co(II), Cd(II), and Zn(II) complexes with N-benzyloxycarbonylglycinato ligand was investigated using the results of TG, DSC and DTG analysis obtained at different heating rates (2.5 to 30 A degrees C ...
Synthesizing a new type of mullite lining
(Inst Za Kovinske Materiale I In Tehnologie, Ljubjana, 2013)
Various possibilities for developing new mullite-based refractory linings that can be applied in a casting process were investigated and are presented in this paper. An optimization of the refractory-lining composition ...
Friction-stir welding of high-strength aluminium alloys and a numerical simulation of the plunge stage
(Institute of Metals and Technology, 2012)
This paper defines a set of welding parameters for the Friction-Stir Welding (FSW) of two forged panels of the alloy EN AW 7049A in a T652 temper and discusses the plunge stage of FSW using numerical modeling. This ...
Poly(urethane-siloxane)s based on hyperbranched polyester as crosslinking agent: Synthesis and characterization / Poli(uretan-siloksani) na bazi hiperrazgranatog poliestra kao umreživača - sinteza i karakterizacija
(Serbian Chemical Society, 2012)
A series of novel polyurethane crosslinked structures (PUs) was prepared from α,ω-dihydroxy-(ethylene oxide-poly(dimethylsiloxane)-ethylene oxide) (EO-PDMS-EO), 4,4'-methylenediphenyl diisocyanate and Boltorn ® hyperbranched ...