Search
Now showing items 1-10 of 111
Liquid metal/ceramic interfaces in dental practice and jewellery manufacturing
(Institute of Metals and Technology, 2010)
Metal-ceramic fusing has been the essential step in obtaining materials that benefit from both ceramic and metal constituents. i e where the combined properties of metal and ceramic layers are desirable When considering ...
Fluidized bed combustion of pesticide-manufacture liquid wastes / Sagorevanje tečnog otpada fabrike pesticida u fluidizovanom sloju
(Serbian Chemical Society, 2010)
Industrial liquid wastes can be in the form of solutions, suspensions, sludges, scums or waste oil and have organic properties. The objective of this work was to demonstrate the technical feasibility of a fluidized bed as ...
Polymer-Bonded Magnetic Materials with Various Nd-Fe-B Filler Content
(Polish Academy of Sciences, 2010)
One of the more important developments in magnetic materials, polymer bonded magnets, have opened a new world of application opportunities. The Nd-Fe-B/polymer composite materials offer an excellent combination of strong ...
Synthesis and characterization of semi-interpenetrating networks of chitosan and poly(N-vinyl-2-pyrrolidone) / Sinteza i karakterizacija semi-interpenetrirajućih mreža hitozana i poli(N-vinil-2-pirolidona)
(Association of Chemical Engineers of Serbia, 2010)
Semi-interpenetrating networks (semi-IPNs) based on chitosan and poly(N-vinyl-2-pyrrolidone) were prepared in order to achieve better mechanical properties. The samples were characterized by FTIR, SEM, DMA analysis and the ...
Water jet technology used in medicine
(Faculty of Mechanical Engineering in Slavonski Brod, Faculty of Electrical Engineering in Osijek, Faculty of Civil Engineering in Osijek, 2010)
Abrasive water jet technology has been recently used mainly in industrial areas. This technology provides several advantages in comparison with conventional methods. At present, it is used in medicine. This paper discusses ...
Influence of notch radius and microstructure on the fracture behavior of Al-Zn-Mg-Cu alloys of different purity
(Elsevier, 2010)
The influence of notch radius on the fracture behavior of two high-strength Al-Zn-Mg-Cu alloys with different Fe content in the T73 condition was investigated. The fracture toughness tests were performed on non-fatigue-precracked ...
Kompresiona svojstva PES tkanine modifikovane RF plazmom i TiO2 nanočesticama
(Srpsko hemijsko društvo, 2010)
Gamma Radiation Absorption Characteristics of Concrete with Components of Different Type Materials
(Acta Physica Polonica A, 2010)
Nuclear facilities as nuclear power stations, nuclear research reactors, particle accelerators and linear accelerator in medical institution using concrete in building construction. The different type materials of the ...
Multifunkcionalna svojstva pamučne tkanine modifikovane koronom i koloidnim nanočesticama TiO2
(Srpsko hemijsko društvo, 2010)