Претраживање
Приказ резултата 1-10 од 182
Energy integration of nitric acid production using Pinch methodology / Energetska integracija proizvodnje azotne kiseline primenom Pinch metodologije
(Association of Chemical Engineers of Serbia, 2015)
Pinch methodology was applied to the heat exchangers network (HEN) synthesis of nitric acid production. The integration is analyzed in two ways, and the results are presented as two different solutions: i) the first solution ...
Application of lignocellulolytic fungi for bioethanol production from renewable biomass / Primena gljiva koje razgrađuju lignocelulozu za proizvodnju bioetanola iz obnovljive biomase
(Association of Chemical Engineers of Serbia, 2015)
Pretreatment is a necessary step in the process of conversion of lignocellulosic biomass to ethanol; by changing the structure of lignocellulose, enhances enzymatic hydrolysis, but often it consumes large amounts of energy ...
Evaluation of possible performance improvement through periodic operation for the reaction of acetic acid anhydride hydrolisis
(European Symposium on Chemical Reaction Engineering (ESCRE 2015), Munich, Germany, 2015)
The nonlinear frequency response (NFR) method is a relatively new, fast and easy, analytical method for evaluating the performance of forced periodically operated chemical reactors. The method has been introduced in our ...
The improved photostability of naproxen in the inclusion complex with 2-hydroxypropyl-β-cyclodextrin / Poboljšana fotostabilnost naproksena u inkluzionom kompleksu sa 2-hidroksipropil-β-ciklodekstrinom
(Association of Chemical Engineers of Serbia, 2015)
The aim of this work was the preparation of the inclusion complex of naproxen with 2- hydroxypropyl-β-cyclodextrin (HP-β-CD) in order to improve the physical and chemical properties of naproxen. The molecular inclusion ...
Synthesis, structure and solvatochromic properties of some novel 5-arylazo-6-hydroxy-4-(4-methoxyphenyl)-3-cyano-2-pyridone dyes: Hydrazone-azo tautomeric analysis
(Elsevier Science Bv, Amsterdam, 2015)
A series of eleven new 5-arylazo-6-hydroxy-4-(4-methoxyphenyl)-3-cyano-2-pyridone dyes was synthesized and their absorption spectra were recorded in twenty solvents in the range 300-600 nm. Different solvent parameters, ...
Influence of pin geometry on mechanical and structural properties of butt friction stir welded 2024-T351 aluminum alloy / Uticaj geometrije trna alata na mehaničke i strukturne karakteristike sučeonog spoja aluminijumske legure 2024-T351 zavarenog postupkom FSW
(Association of Chemical Engineers of Serbia, 2015)
The aim of this work was to investigate the combined effect of small difference in pin geometry, together with rotation and welding speed on the weldability, mechanical and structural properties of FSW 2024-T351 Al plates. ...
Metallurgical processing of copper secondary raw materials / Metalurška prerada sekundarnih sirovina bakra
(Savez inženjera i tehničara Srbije, Beograd, 2015)
Procedures for copper secondary raw materials processing include two basic stages: pretreatment of the copper waste and its further metallurgical processing. For copper waste pretreatment technology, there are different ...
Formic acid electrooxidation on carbon supported platinum catalyst with preferential plane orientation / Oksidacija mravlje kiseline na platinskim katalizatorima na ugljeničnom nosaču sa preferencijalno orijentisanim ravnima
(Savez inženjera i tehničara Srbije, Beograd, 2015)
Pt-based nanocatalysts supported on Vulcan XC-72R carbon, were prepared by water-in-oil microemulsion method, with addition of various amounts of HCl in the water phase. Polyethileneglycoldodecylether (BRIJ 30) was used ...
The effect of cooling rate of slag from primary copper production in the valorization of copper in the flotation process
(Savez inženjera metalurgije Srbije, Beograd, 2015)
Technological procedure of slow cooling slag from primary copper production is applied in the purpose of copper recovery in the level of 98.5% to blister. This technological procedure is divided into two phases, first slow ...
The effect of salinity on the sorption of cadmium ions from aqueous medium on Fe(III)-sepiolite / Uticaj saliniteta vode na sorpciju jona kadmijuma na Fe(III)-sepiolitu
(Association of the Chemical Engineers of Serbia, 2015)
In this study, the sorption of cadmium ions onto sepiolite modified with hydrated iron(III) oxide, Fe(III)-sepiolite, has been investigated in natural seawater, artificial seawater, aqueous solution of NaCl of the same ...