Претраживање
Приказ резултата 1-10 од 21
Improvement of the mechanical properties of spark plasma sintered hap bioceramics by decreasing the grain size and by adding multi-walled carbon nanotubes
(International Institute for the Science of Sintering, Beograd, 2013)
Composites based on HAP and oxidized multi-walled carbon nanotubes (o-MWCNT) and monophase HAP materials were processed by spark plasma sintering. Starting from stoichiometric nano-sized HAP powder, monophase bioceramics ...
Mechanical properties of biomorphic silicon carbide ceramics
(International Institute for the Science of Sintering, Beograd, 2011)
Biomorphous β-SiC ceramics were produced from linden wood by impregnation with tetraethyl orthosilicate (TEOS), followed pyrolysis and high temperature treatment at 1580°C. Six specimen groups included charcoal and five ...
Mechanical properties correlation to processing parameters for advanced alumina based refractories
(International Institute for the Science of Sintering, Beograd, 2012)
Alumina based refractories are usually used in metallurgical furnaces and their thermal shock resistance is of great importance. In order to improve thermal shock resistance and mechanical properties of alumina based ...
Tension mechanical properties of recycled glass-epoxy composite material / Mehanička svojstava recikliranog staklo-epoksi kompozitnog materijala
(Faculty of Technology, Novi Sad, 2012)
The significance of composite materials and their applications are mainly due to their good properties. This imposes the need for their recycling, thus extending their lifetime. Once used composite material will be disposed ...
Dynamic mechanical properties of aramid fabrics impregnated with multiwalled carbon nanotubes / Dinamičko mehanička svojstva aramidnih lamina impregnisanih sa višeslojnim ugljeničnim nanocevima
(Engineering Society for Corrosion, Belgrade, Serbia, 2013)
Carbon nanotubes (CNT) represent allotropes of carbon with a cylindrical nanostructure. In multiwalled carbon nanotubes (MWCNT), graphitic layers make up concentric tubes. The multiwalled nanotubes length in our research ...
Structure and properties of Al-Mg alloy sheets produced by accumulative roll bonding. / Struktura i svojstva višeslojnih Al-Mg traka dobijenih hladnim valjanjem
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2018)
Influence of accumulative roll bonding (ARB) and conventional cold rolling (CR) on the mechanical and corrosion properties of an AA5083 type alloy with 4.2 wt% Mg and a modified alloy with 5.1 wt% Mg and addition of 0.5 ...
Effect of AL2O3 particles on the toughness of hybrid composite with EVA matrix and UHMWPE fibersas reinforcement / Uticaj AL2O3 čestica na žilavost hibridnog kompozita sa EVA matricom ojačanog UHMWPE vlaknima
(Savez inženjera i tehničara Srbije, Beograd, 2018)
The aim of this paper is to investigate the mechanical properties of hybrid composites with the polymer matrix of the copolymer of ethylene and vinyl acetate (EVA), ultra high molecular weight polyethylene fibers (UHMWPE) ...
The impact of wood fiber surface modification on physical properties of wood-polymer composites / Uticaj modifikacije površine vlakana drveta na mehanička svojstva kompozita polimer-drvo
(Savez inženjera i tehničara Srbije, Beograd, 2016)
In this paper, the impact of wood fiber surface modification on mechanical properties of poly-(methyl methacrylate)(PMMA)-wood composite was examined. FTIR analysis has shown that the wood fiber surface modification was ...
Investigation of the influence of processing parameters on the properties of bioceramic materials based on calcium hydroxyapatite and calcium phosphate obtained by different sintering technique / Ispitivanje uticaja parametara procesiranja na svojstva biokeramičkih materijala na bazi kalcijum-hidroksiapatita i kalcijum-fosfata dobijenih različitim tehnikama sinterovanja
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2010)
Calcium phosphate bioceramics materials based on hydroxyapatite (HAP) and tricalcium phosphate (TCP), due to their chemical composition, excellent biocompatibility, bioactivity and osteoconduction have received considerable ...
The influence of silver, copper and zinc ions on the properties of bioceramic materials based on calcium phosphate / Uticaj jona srebra, bakra i cinka na svojstva biokeramičkih materijala na bazi kalcijum-hidroksiapatita i kalcijum-fosfata
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2016)
Calcium phosphates constitute the inorganic part of bones and teeth of mammals. This fact is well known and has encouraged researchers to apply hydroxyapatite (HAp, Ca10(PO4)6(OH)2) and tricalcium phosphate (TCP, Ca3(PO4)2), ...