Претраживање
Приказ резултата 1-10 од 58
The influence of thermomechanical treatment and chemical composition on recrystallization of Al-Mg alloys
(Savez inženjera metalurgije Srbije, Beograd, 2007)
Recrystallization behaviour of AlMg3, AlMg4.5Mn and AlMg6Mn alloy plates subjected to different thermomechanical treatments (TMTs), has been studied by means of optical microscopy and hardness measurements. Applied two-stage ...
Influence of Cu and Mn content on the properties of Al-Mg4.5-(Mn,Cu) type alloy sheets
(Savez inženjera metalurgije Srbije, Beograd, 2009)
Influence of Cu and Mn content on the grain structure, precipitation effects and mechanical properties of two Al-Mg4.5-(Mn,Cu) type sheets was considered. It was found that a variety of grain size can be obtained in alloy ...
FEM modeling of dynamic recrystallization in 304 stainless steel
(Savez inženjera metalurgije Srbije, Beograd, 2005)
Series of isothermal uniaxial compression tests in the temperature range (600-1100°C) with two strain rates of 0.1 and 1.0 s"1 were performed with the aim to obtain input data for the finite elements modeling (FEM) of ...
Possibilities of recycling of magnesium and magnesium alloys
(Savez inženjera metalurgije Srbije, Beograd, 2004)
In this paper are presented results of experimental investigation of processing of non oil-contaminated metal scrap based on magnesium and its alloys. These are the firs investigations of magnesium scrap recycling in Serbia ...
Characterization of wastewater streams from Bor site
(Savez inženjera metalurgije Srbije, Beograd, 2007)
This paper presents full characterization of wastewater streams within Bor copper mine. Seven different wastewater streams were identified and fully characterized (origin, flow rate, chemical and physical properties) on ...
Overview of the materials: Metals selection process / Strategija izbora metalnih materijala
(Savez inženjera metalurgije Srbije, Beograd, 2005)
Overview of the metal material selection process will be subject of this paper. Interrelationship among design, materials and processing will be presented. Materials selection for a new design as well as materials substitution ...
The growth of germanijum single crystal in the universal multizone crystallization furnace by application of the electronic Bridgman-Stocbarger method / Rast monokristala germanijuma u univerzalnom multizonskom kristalizatoru primenom elektronske Bridgman-Stocbarger metode
(Savez inženjera metalurgije Srbije, Beograd, 2002)
This paper examines the possibility of the application of multizone furnace, i.e. universal multizone crystallizator furnace in obtaining germanijum (Ga added) single crystal using electronic Bridgman-Stocbarger method. ...
The influence of the cellular structure of the seed on the structure single crystal superalloy based on Ni / Uticaj ćelijske strukture klice na strukturu monokristala superlegure na bazi Ni
(Savez inženjera metalurgije Srbije, Beograd, 2003)
This paper elaborates the investigations about influence of the cellular structure of the seed to the distance between primary dendrites, λ1. Investigations were performed on superalloy single crystals based Ni which were ...
The influence of titanium and cerium on microstructure and properties of Fe-C-Cr-Nb alloys / Uticaj titana i cerijuma na mikrostrukturu i svojstva Fe-C-Cr-Nb legura
(Savez inženjera metalurgije Srbije, Beograd, 2005)
In this paper, the influence of titanium and cerium on the microstructure and properties of Fe-C-Cr-Nb alloys are examined, in both as-cast and heat treated state. These elements affect the crystallisation process of ...
Thermomechanical processing of micro alloyed steels in Sartid A.D.: Part III - comparison of of Tnr temperatures determined on laboratory and industrial scale / Termomehanička prerada mikrolegiranih čelika koncerna Sartid: III deo - poređenje Tnr temperatura određenih u laboratorijskim i industrijskim uslovima
(Savez inženjera metalurgije Srbije, Beograd, 2002)
The aim of this work was to compare the Tnr temperatures of microalloyed steels estimated on laboratory (Tnr**l) and industrial scale (Tnr**l). Laboratory and industrial scale are related to testing on high temperature ...