Претраживање
Приказ резултата 1-10 од 18
The use of image analysis program for the determination of surface deterioration of refractory specimen during thermal shock / Korišćenje programa za analizu slike za određivanje stepena oštećenja vatrostalnog uzorka pri termošoku
(Društvo za ispitivanje i istraživanje materijala i konstrukcija Srbije, Beograd, 2006)
During examination of refractory specimen, one of the most important characteristics is their resistance to thermal shock. Standard method of testing is based on monitoring the surface shanging during thermal stability ...
Electrophoretic deposition of thin alumina films from water suspension
(Elsevier, Amsterdam, 2002)
Alumina water suspensions have been prepared for thin alumina film deposition on steel. The type and quantity of deflocculant have been determined using zeta potential and viscosimetric measurements. The deposition was ...
Influence of formation conditions and precursor viscosity on mean fiber diameter formed using the relating disk method
(Elsevier, Amsterdam, 2000)
Alumina ceramic fibers were produced from aluminum-hydroxidechloride based sol. Polyvinyl alcohol and surface active material were applied to adjust the rheological characteristics of the: sol. The rotating disk formation ...
The influence of the deposition parameters on the porosity of thin alumina films on steel / Uticaj parametara elektroforetskog taloženja praha aluminijum-oksida iz vodenih suspenzija na poroznost dobijenih tankih filmova na čeliku
(Serbian Chemical Society, Belgrade, 2004)
The influence of the deposition parameters on the porosity of thin alumina films electrophoretically deposited on steel from aqueous suspensions was investigated. The effects of the applied voltage, deposition time, ...
Image analysis of protective layer of zinc on steel obtained using the hot process / Analiza slike za karakterisanje zaštitnog sloja cinka na čeliku dobijenog toplim cinkovanjem
(Savez inženjera metalurgije Srbije, Beograd, 2003)
The procedure for measuring the thickness of anticorrosion protective layer of zinc on steel is given. The metallographic images are used for this measurement. Results are statistically handled and results are used to ...
Cavitation damage of the medium carbon steel: Implementation of image analysis
(Elsevier Science Bv, Amsterdam, 2008)
Cavitation damage of the medium carbon steel was performed using the modified vibratory cavitation test set up. Erosion rates were measured by analytical method. The morphology of damage under cavitation action was determined ...
Thermal stability testing of refractory specimen
(Amer Soc Testing Materials, W Conshohocken, 2006)
The most important properties usually measured for refractories are working temperature and thermal stability. Thermal stability of the alumina based samples was measured using standard laboratory procedure, water quench ...
Thermal stability of cordierite/silicon carbide composites after cyclic thermal shock
(Natl Inst Optoelectronics, Bucharest-Magurele, 2008)
In this paper composite material made from silicium carbide and cordierite was used in experiments. Behavior of the material in conditions of rapid temperature changes was investigated. Modified water quench test was applied ...
A fracture mechanics approach to thermal shock investigation in alumina-based refractory
(9th International Conference on Multiscale and Functionally Graded Materials, FGM IX, 2008)
The thermal shock behavior of large grain size, alumina-based refractories was investigated experimentally using a standard water quench test. A mathematical model was employed to simulate the thermal stability behavior. ...
Rotating disk alumina precursor fiber formation process stability determination using image analysis
(Savez inženjera metalurgije Srbije, Beograd, 2002)
Precursor fibers are made from the aluminium-hydroxide chloride based sols. The process stability can be influenced both by the fiber formation conditions and the rheology of the sol. The distance from the disk canter is ...