Претраживање
Приказ резултата 1-10 од 215
Catalytic incineration of ethylene oxide in the packed bed reactor
(Elsevier, 2006)
Investigations of catalytic incineration of ethylene oxide (ETO) over Pt/Al2O3 catalyst have been conducted on laboratory and pilot scale level. The measurements of the reaction rate conducted under gradientless conditions ...
Carbon cryogel as support of platinum nano-sized electrocatalyst for the hydrogen oxidation reaction
(Electrochimica Acta, 2006)
The kinetics of hydrogen oxidation reaction was studied in perchloric acid solution on carbon-supported Pt nanoparticles using the rotating disk electrode technique. Carbon cryogel and commercial carbon black. Vulcan XC-72 ...
High activity of Pt4Mo alloy for the electrochemical oxidation of formic acid
(Amer Chemical Soc, Washington, 2007)
Surface processes on Pt4Mo alloy well-defined by X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD) were studied in acid solution by cyclic voltammetry. It was established that Mo in the alloy is much more ...
Manganese leaching in the FeS2-MnO2-O2-H2O system at high temperature in an autoclave
(Elsevier Science Publishers B.V., 2000)
The paper shows: (a) the results of pyrite oxidation by gaseous oxygen in water suspension at high temperatures in an autoclave and (b) the results of simultaneous leaching of Mn4+ from pyrolusite ore by H2SO4 and FeSO4, ...
Prediction of the choking velocity and voidage in vertical pneumatic conveying of coarse particles
(Elsevier, 2006)
A method for predicting the choking velocity and voidage in vertical pneumatic conveying of coarse particles is developed and verified using the data obtained in this study as well as the data of Capes and Nakamura [C.E. ...
Influence of ionic equilibrium in the CuSO(4)-H(2)SO(4)-H(2)O system on the formation of irregular electrodeposits of copper
(Oxford : Pergamon-Elsevier Science Ltd, 2008)
The relative concentration of hydrogen ion (H(+)) as a function of sulfuric acid (H(2)SO(4)) concentration (calculated using Pitzer's model) and the electrochemical processes by which irregular copper deposits are formed ...
Micromechanical modelling of fracture toughness in overaged 7000 alloy forgings
(Elsevier, 2006)
In this article, a multiple micromechanisms-based model that quantitatively relates the plane-strain fracture toughness, KIC, of overaged 7000 alloy forgings to their microstructural attributes, fracture surface morphology ...
Effect of different fermentation parameters on bioethanol production from corn meal hydrolyzates by free and immobilized cells of Saccharomyces cerevisiae var. ellipsoideus
(Wiley, Hoboken, 2009)
BACKGROUND: Bioethanol produced from renewable biomass, such as corn meal, is a biofuel that is both renewable and environmentally friendly. Significant scientific and technological investments will be needed to achieve ...
The effect of the mass ratio of hard and soft segments on some properties of thermoplastic poly(ester-siloxane)s
(John Wiley and Sons Ltd, 2004)
A series of thermoplastic elastomers based on soft polydimethylsiloxane (PDMS) and hard poly(butylene terephthalate) (PBT) segments was synthesized using a two-step transesterification reaction in the melt. The molar mass ...
Leaching of copper(I) sulfide in calcium chloride solution
(Elsevier, 2000)
Finely grained samples of copper(I) sulphide were leached by CaCl2·2H2O solution with added HCl and the introduction of gaseous oxygen. The occurrence probability of chemical reactions was analyzed based on literature and ...