Претраживање
Приказ резултата 1-10 од 21
Comparative kinetic study of mechanical activation process of mica and talc for industrial application
(Elsevier Sci Ltd, Oxford, 2014)
Mica and talc have wide areas of application as a raw material in a number of industrial branches. Mechanically activated mica has specific applications such as: capacitors, insulators, and pearlescent pigments. Talc is ...
Adhesion testing of composites based on Bis-GMA/TEGDMA monomers reinforced with alumina based fillers on brass substrate
(Elsevier Sci Ltd, Oxford, 2018)
Quantitative assessment of the adhesion behavior between the composite film having UV cured Bis-GMA (Bisphenol A glycidylmethacrylate)/TEGDMA (triethylene glycol dimethacrylate) as matrix and the aluminum oxide based ...
Influence of sintering temperature on thermal shock behavior of low cement high alumina refractory concrete
(Elsevier Sci Ltd, Oxford, 2014)
The purpose of this study was to investigate behavior and degradation level of refractory concrete sintered at different temperatures during the thermal stability testing. Alumina based low cement castable was synthesized, ...
Nanomechanical and anti-stabbing properties of Kolon fabric composites reinforced with hybrid nanoparticles
(Elsevier Sci Ltd, Oxford, 2017)
In this study carbon nanotubes (CNT) and silica nanoparticles (SiO2) were added to enhance the dynamic mechanical and anti-stabbing properties of the polyurethaneip-aramid multiaxial fabric (Kolon fabric) composites for ...
Thermal properties and thermal stability of PP/MWCNT composites
(Elsevier Sci Ltd, Oxford, 2016)
The effects of the filler size and content on thermal properties and thermal stability of polypropylene (PP) composites filled with four different sizes of multi-walled carbon nanotubes (MWCNTs) were investigated through ...
New composites based on waste PET and non-metallic fraction from waste printed circuit boards: Mechanical and thermal properties
(Elsevier Sci Ltd, Oxford, 2017)
Influence of the addition of three different non-metallic fractions (NMF), obtained by processing of printed circuit boards (PCBs), on the mechanical and thermal properties of unsaturated polyester resin (UPR) based ...
Pectin-polyvinylpyrrolidone films: A sustainable approach to the development of biobased packaging materials
(Elsevier Sci Ltd, Oxford, 2017)
In this work, the new biodegradable blend films composed of natural polymer pectin and synthetic polymer polyvinylpyrrolidone were obtained through casting process. The concentration of glycerol in all formulations was ...
Physico-chemical and mechanical properties and antibacterial activity of silver/poly(vinyl alcohol)/graphene nanocomposites obtained by electrochemical method
(Elsevier Sci Ltd, Oxford, 2016)
Silver/poly(vinyl alcohol) and silver/poly(vinyl alcohol)/graphene nanocomposites in different forms (colloid dispersion, thin films and hydrogel discs) were synthesized by electrochemical reduction of Ag+ ions at constant ...
Improvement of mechanical properties and antibacterial activity of crosslinked electrospun chitosan/poly (ethylene oxide) nanofibers
(Elsevier Sci Ltd, Oxford, 2017)
In this study conditions for green crosslinking with citric acid of chitosan/PEO (polyethylene oxide) nanofibers were evaluated. The thermal in situ crosslinking enabled penetration of crosslinking agent into the matrix ...
Biological activity of electrochemically synthesized silver doped polyvinyl alcohol/graphene composite hydrogel discs for biomedical applications
(Elsevier Sci Ltd, Oxford, 2016)
Silver/poly(vinyl alcohol), Ag/PVA, and silver/poly(vinyl alcohol)/graphene, Ag/PVA/Gr, composite hydrogel discs were produced by freezing/thawing, followed by electrochemical reduction of Ag+ ions inside respective matrices, ...