Pretraživanje
Prikaz rezultata 1-10 od 16
Comprehensive electrochemical study on corrosion performance of graphene coatings deposited by chemical vapour deposition at atmospheric pressure on platinum-coated molybdenum foil
(Pergamon-Elsevier Science Ltd, Oxford, 2018)
In this work, we present the results of electrochemical, Raman, FE-SEM/EDS, and XPS studies of graphene coatings deposited by chemical vapour deposition at atmospheric pressure on Mo foil and Pt-coated Mo foil as catalysts. ...
Spectrophotometric study of the anodic corrosion of Ti/RuO2 electrode in acid sulfate solution
(Elsevier Ltd., 2004)
Electrochemical properties of RuO2-based electrode, particularly the oxygen evolution and anodic dissolution of RuO2 have been investigated in 0.5 mol dm-3 H2SO4 solution by means of polarization measurements and product ...
Wear and corrosion behaviour of Ti-13Nb-13Zr and Ti-6Al-4V alloys in simulated physiological solution
(Pergamon-Elsevier Science Ltd, Oxford, 2011)
Wear and corrosion behaviour of cold-rolled Ti-13Nb-13Zr alloy, with martensitic microstructure, and Ti-6Al-4V ELI alloy, in martensitic and two-phase (alpha + beta) microstructural conditions, was studied in a Ringer's ...
Microstructure and pitting corrosion resistance of annealed duplex stainless steel
(Elsevier Ltd, 2006)
The transition from metastable to stable pitting was studied in 0.5 M NaCl water solution for two cast duplex stainless steels under different microstructural conditions achieved by annealing in the range from 900 °C to ...
Adsorption and corrosion inhibitive properties of some organic molecules on iron electrode in sulfuric acid
(Elsevier, 2002)
Adsorption and corrosion inhibitive properties of three different organic molecules: 2-naphthalenesulfonic acid, 2,7-naphthalenedisulfonic acid and 2-naphthol-3,6-disulfonic acid are investigated on Armco-iron electrode ...
Composition and processing effects on the electrochemical characteristics of biomedical titanium alloys
(Pergamon-Elsevier Science Ltd, Oxford, 2014)
The electrochemical behaviour of the Ti-13Nb-13Zr and Ti-6Al-4V ELI alloys with martensitic microstructures was investigated by polarization and electrochemical impedance spectroscopy (EIS) in Ringer's solution. The impedance ...
The effect of T4 heat treatment on the microstructure and corrosion behaviour of Zn27Al1.5Cu0.02Mg alloy
(Pergamon-Elsevier Science Ltd, Oxford, 2011)
The effect of heat treatment on the microstructure and corrosion behaviour of Zn27Al1 5CuO 02Mg alloy was examined The alloy was prepared by melting and casting route and then thermally processed (T4 regime) Corrosion ...
Corrosion stability of epoxy coatings on aluminum pretreated by vinyltriethoxysilane
(Pergamon-Elsevier Science Ltd, Oxford, 2008)
The electrochemical and transport properties and adhesion of epoxy coatings electrodeposited on aluminum pretreated by vinyltriethoxysilane (VTES) were investigated during exposure to 3% NaCl. The VTES films were deposited ...
Electrochemical testing of noble metal dental alloys: The influence of their chemical composition on the corrosion resistance
(Corrosion Science, 2021)
Platinum and nine commercial dental alloys with the contents of noble metals ranging from 27 wt.% to 97.6 wt. % were investigated by the procedure described in the Standard ISO 10271:2009, Electrochemical testing was ...
The EIS investigation of powder polyester coatings on phosphated low carbon steel: The effect of NaNO2 in the phosphating bath
(Pergamon-Elsevier Science Ltd, Oxford, 2011)
The effect of different type of iron-phosphate coatings on corrosion stability and adhesion characteristic of top powder polyester coating on steel was investigated. Iron-phosphate coatings were deposited on steel in the ...