Pretraživanje
Prikaz rezultata 1-10 od 1203
The influence of polypyrrole films on the corrosion behavior of iron in acid sulfate solutions
(Elsevier Science Sa, Lausanne, 1998)
The corrosion behavior of mild steel covered by electrodeposited polypyrrole films was investigated by electrochemical impedance spectroscopy. Electrodeposition of polypyrrole was performed from an aqueous solution of ...
Sulphatization of manganese slime from zinc electrolysis with ferrosulphate
(Wiley, Hoboken, 1998)
The kinetics and mechanism of the sulphatization of manganese slime from the zinc electrolysis with Fe(ll) sulphate was studied. The priority of chemical reactions was determined on the basis of the results of thermodynamic ...
The morphology of cavitation damage of heat-treated medium carbon steel / Morfologija kavitacionog oštećenja srednje-ugljeničnog čelika u poboljšanom stanju
(Serbian Chemical Society, Belgrade, 2006)
In this paper the morphology of the cavitation damage to heat-treated medium carbon steel was analyzed. The experiments were conducted using a modified vibratory cavitation test set up. The erosion rates were measured by ...
Dynamical mechanical analysis of photocrosslinked hyperbranched urethane acrylates
(Srpsko hemijsko društvo, Beograd, 2004)
A series of acrylate functionalized samples based on hyperbranched hydroxy-terminated polyesters with different molecular weights and different degrees of acrylation were synthesized. The obtained urethane acrylates were ...
Comparative potentiodynamic study of nickel and hydrogen underpotential deposition at polycrystalline platinum electrode in weak acid and neutral solutions
(6th Conference of the Yugoslav Materials Research Society, YUCOMAT VI: Current Research in Advanced Materials and Processes, 2005)
Underpotential deposition of nickel and hydrogen on polycrystalline platinum in weak acid and neutral solutions (3.5 lt = pH lt = 7.0), with and without Ni2+-ions, has been examined using cyclic voltammetric technique ...
Properties of dispersion-hardened copper made by internal oxidation of prealloyed copper powder containing 2.5wt. % Al
(Trans Tech Publications Ltd, Durnten-Zurich, 2005)
Prealloyed copper powder containing 2.5wt. %Al was processed in a planetary ball mill to evaluate matrix hardening due to formation of Al2O3 particles in situ by internal oxidation. After milling, the powders were heat ...
Synthesis of nanostructured boehmite powder by sol-gel method from industrial Na-aluminate solution
(Techna Srl, Faenza, 2003)
Supersaturated Na-aluminate solution from KAP's Alumina plant Bayer process was chosen, as a precursor to synthesize low sodium content nanostructured boehmite powder. Firstly, the solution, was neutralized with strong ...
Overview of Radiation Effects on Emerging Non-Volatile Memory Technologies
(Vinca Inst Nuclear Sci, 2017)
In this paper we give an overview of radiation effects in emergent, non-volatile memory technologies. Investigations into radiation hardness of resistive random access memory, ferroelectric random access memory, magneto-resistive ...
Chain conformational statistics and mechanical properties of elastomer composites
(Progress in Advanced Materials and Processes: Proceedings of the Fifth Jugoslav Materials Research Society, YUCOMAT V, 2004)
A new equation of state for elastomer network under constrains due to fillers has been proposed and verified for two most common and industry important rubbers, natural rubber and styrene-butadiene rubber. A series of ...
Mechanical features of copper coatings electrodeposited by the pulsating current (PC) regime on Si(111) substrate
(International Journal of Electrochemical Science, 2020)
Mechanical features of the Cu coatings produced by the pulsating current (PC) regime on Si(111) substrate have been investigated. The Cu coatings were electrodeposited by varying duty cycle (15-50 %) and keeping the current ...