Претраживање
Приказ резултата 1-10 од 17
Solids holdup and pressure drop in gas-flowing solids-fixed bed contactors
(Amer Chemical Soc, Washington, 2003)
Fundamentally based model for pressure drop in gas-flowing solids-fixed bed contactors is presented, together with a phenomenological semiempirical model for prediction of dynamic holdup. These simple models do not require ...
Toward Optimum Working Fluid Mixtures for Organic Rankine Cycles using Molecular Design and Sensitivity Analysis
(Amer Chemical Soc, Washington, 2013)
This work presents a Computer-Aided Molecular Design (CAMD) method for the synthesis and selection of binary working fluid mixtures used in Organic Rankine Cycles (ORC). The method consists of two stages, initially seeking ...
Modeling a Catalytic Reactor for Hydrotreating of Straight-Run Gas Oil Blended with Fluid Catalytic Cracking Naphtha and Light Cycle Oil: Influence of Vapor-Liquid Equilibrium
(Amer Chemical Soc, Washington, 2014)
Reducing the sulfur content of diesel fuels may require adjusted operation of low-pressure hydrotreater units. A mathematical model for co-hydrotreating of straight run gas oil blended with fluid catalytic cracking naphtha ...
Modeling and predictions of solids dynamic holdup in gas-flowing solids-fixed bed contactors
(Amer Chemical Soc, Washington, 2004)
A model based on first principles and free of any semiempirical parameters is presented for trickling solids holdup in gas-flowing solids-fixed bed contactors. A small double-cone cavity is used to characterize the voids ...
Fast estimation of quasi-steady states of cyclic nonlinear processes based on higher-order frequency response functions. Case study: Cyclic operation of an adsorption column
(Amer Chemical Soc, Washington, 2006)
A new method for fast approximate calculation of quasi-steady states of cyclic processes is presented. The method is based on the concept of higher-order frequency response functions. The system input is represented in the ...
Solids residence time distribution in gas-flowing solids-fixed bed contactors
(Amer Chemical Soc, Washington, 2005)
Flowing solids residence time distribution in gas-flowing solids-fixed bed contactors was investigated using a tracer technique with a step signal as input. Particles of different color (all other properties being the same) ...
Removal of Sulfur Compounds from Mineral Insulating Oils by Extractive Refining with N-Methyl-2-pyrrolidone
(Amer Chemical Soc, Washington, 2012)
Copper sulfide deposits in the insulation systems of power transformers decrease the dielectric properties of the insulation and therefore constitute a significant risk for the operation of power transformers. Disulfides, ...
Effects of Catalyst Activity, Particle Size and Shape, and Process Conditions on Catalyst Effectiveness and Methane Selectivity for Fischer-Tropsch Reaction: A Modeling Study
(Amer Chemical Soc, Washington, 2017)
We investigate effects of catalyst activity, catalyst particle shape (sphere, slab, and hollow cylinder), size (i.e., diffusion length), catalyst distribution (uniform vs eggshell type distribution for a spherical particle), ...
Multiscale and Multiphase Model of Fixed-Bed Reactors for Fischer-Tropsch Synthesis: Optimization Study
(Amer Chemical Soc, Washington, 2018)
Our previously developed mathematical model is used for parametric sensitivity and optimization study of conventional and milliscale fixed-bed reactors (FBRs) for Fischer-Tropsch synthesis (FTS). Five indicators are chosen ...
Bactericidal Efficiency of Silver Nanoparticles Deposited onto Radio Frequency Plasma Pretreated Polyester Fabrics
(Amer Chemical Soc, Washington, 2010)
The potential application of low-temperature radio frequency (RF) plasma for fiber surface activation in order to enhance the binding efficiency of colloidal silver nanoparticles onto the polyester fabrics and improve the ...