Претраживање
Приказ резултата 1-10 од 23
UV-curable hyperbranched urethane acrylate oligomers containing soybean fatty acids
(Elsevier Science Sa, Lausanne, 2005)
Urethane acrylate resins based on partially modified aliphatic hyperbranched polyesters (HBP) have been synthesized. HBP of the second and the third generation were synthesized from 2,2-bis(hydroxymethyl)propionic acid and ...
The effect of lignin on the structure and characteristics of composite coatings electrodeposited on titanium
(Elsevier Science Sa, Lausanne, 2012)
Composite coatings based on lignin, obtained by electrophoretic deposition (EPD) on titanium, were investigated. The aim of this work was to produce hydroxyapatite/lignin (HAP/Lig) coatings on titanium and to investigate ...
The use of nanoclay in preparation of epoxy anticorrosive coatings
(Elsevier Science Sa, Lausanne, 2014)
Epoxy/clay nanocomposites (NC) have become a very interesting topic among researchers in the past two decades because nanoclays have a positive effect on the mechanical, thermal and especially barrier and anticorrosive ...
Electrochemical polymerization and initial corrosion properties of polyaniline-benzoate film on aluminum
(Elsevier Science Sa, Lausanne, 2009)
Electrochemical synthesis of polyaniline (PANI) on aluminum electrode from aqueous Solution Of 0.25 mol dm(-3) aniline and 0.2 mol dm(-3) sodium benzoate has been investigated under potentiodynamic and galvanostatic ...
Corrosion studies on electrochemically deposited PANI and PANI/epoxy coatings on mild steel in acid sulfate solution
(Elsevier Science Sa, Lausanne, 2005)
The corrosion behavior of mild steel and mild steel covered by electrochemically deposited (a) polyaniline (PANI) film, (b) epoxy coating
and (c) PANI/epoxy coating system in 0.1 M sulfuric acid solution were investigated ...
Corrosion behavior and thermal stability of electrodeposited PANI/epoxy coating system on mild steel in sodium chloride solution
(Elsevier Science Sa, Lausanne, 2006)
The corrosion behavior, sorption characteristics and thermal stability of epoxy coatings electrodeposited on mild steel (MS) and mild steel with electrochemically deposited polyaniline (PANI) film were investigated in 3% ...
Methacryloxypropyltrimethoxysilane films on aluminium: Electrochemical characteristics, adhesion and morphology
(Elsevier Science Sa, Lausanne, 2009)
The electrochemical characteristics, adhesion and morphology of methacryloxypropyltrimethoxysilane (MAPT) films on aluminium were investigated during exposure to 3 wt.% NaCl. The MAPT films were deposited on aluminium ...
The influence of zinc surface pretreatment on the adhesion of epoxy coating electrodeposited on hot-dip galvanized steel
(Elsevier Science Sa, Lausanne, 2007)
The adhesion and electrochemical properties of epoxy coatings electrodeposited on hot-dip galvanized steel with and without passive films were investigated during exposure to 3% NaCl. The passive films were formed in hot ...
The influence of different components on interpenetrating polymer network's (IPN's) characteristics as automotive top coats
(Elsevier Science Sa, Lausanne, 2010)
The aim of this study was to investigate the influence of different components of interpenetrating polymer networks (IPNs) on their behavior in dual curing automotive applications. Dual curing is one of possible ways to ...
The influence of aluminium surface pretreatment on the corrosion stability and adhesion of powder polyester coating
(Elsevier Science Sa, Lausanne, 2010)
One of the most important factors in corrosion prevention by protective coatings is the coating adhesion loss under environmental influence. Thus, adhesion strength is often used when characterizing protective properties ...