Search
Now showing items 1-10 of 17
TIMS and MALDI TOF of endohedral Li-n"C-70 (n=1-3) metallofullerenes
(Natl Inst Optoelectronics, Bucharest-Magurele, 2008)
Using the ion implantation technique (introducing negatively charged fullerene into a low temperature lithium plasma column by a strong axial magnetic field) endohedral fullerenes Li"C-70, Li-2"C-70 and Li-3"C-70 were ...
Thermal shock behavior of alumina based refractories: Comparison with the mechanical data and thermal stability behavior prediction
(Belgian Ceramic Soc, Mons, 2008)
The thermal shock behavior of a large grain size alumina based refractories were investigated both experimentally, using standard procedure of water quench test and using mathematical calculation method for determining the ...
Mechanics of submerged jet cavitating action: material properties, exposure time and temperature effects on erosion
(Springer, New York, 2008)
Experimental setup with a submerged cavitating jet has been used for the study of influences of material, exposure time and working fluid temperature on the erosion process. Each of the parameters has been varied separately, ...
Study of the simulated heat affected zone of creep resistant 9-12% advanced chromium steel
(Taylor & Francis Inc, Philadelphia, 2008)
Global warming leads to research-development attempts worldwide with a view to reduce CO2 emission. Therefore, in the energy supply sector, a special focus has been directed to further development of steels that can endure ...
The influence of bonding agents in improving interactionsin composite propellants determined using image analysis
(Wiley, Hoboken, 2008)
Binder-oxidizer interactions in rocket composite propellants can be improved using adequate bonding agents. In the present work, the effectiveness of different 1,3,5-trisubstituted isocyanurates was determined by stereo ...
Method for determining refractory specimen heat resistance
(Springer, New York, 2008)
The most important properties governing the operation of refractories are refractoriness, service temperature and heat resistance. The heat resistance of specimens based on Al2O3 is determined by a standard laboratory ...
Isopiestic investigation of the osmotic and activity coefficients of {yMgCl(2)+(1-y)MgSO4}(aq) and the osmotic coefficients of Na2SO4 center dot MgSO4(aq) at 298.15 K
(Springer/Plenum Publishers, New York, 2008)
Isopiestic vapor-pressure measurements were made for {yMgCl(2) + (1-y)MgSO4}(aq) solutions with MgCl2 ionic strength fractions of y = (0,0.1997,0.3989,0.5992,0.8008, and 1) at the temperature 298.15 K, using KCl(aq) as the ...
Surface carriers' concentration dynamics caused by a small alternating applied voltage
(Natl Inst Optoelectronics, Bucharest-Magurele, 2008)
One of our previous papers was devoted to threshold voltage in MOSFETs and MODFETs viewed as a problem of nonlinear dynamics. The behavior of surface carriers' concentration under D.C. (direct current) applied voltage has ...
Heat transfer coefficient and pressure drop during refrigerant R-134a condensation in a plate heat exchanger
(Versita, Warsaw, 2008)
The condensation heat transfer coefficient and the two-phase pressure drop of refrigerant R-134a in a vertical plate heat exchanger were investigated experimentally. The area of the plate was divided into several segments ...
Implementation of a quality management system in meteorological practice in Serbia
(Springer, New York, 2008)
An optional approach in the meteorological service Quality Management System (QMS) based on the case study of the Republic Hydrometeorological Service (MHS) of Serbia is presented and discussed in this paper. The idea is ...