Претраживање
Приказ резултата 1-10 од 17
Ultra-high breakdown field varistors prepared from individually synthesized nanoprecursors
(Elsevier Sci Ltd, Oxford, 2015)
Previously synthesized nanocrystalline ZnO doped with cobalt and manganese, Bi2O3 and Sb2O3 were the precursors for high voltage varistors preparation. Varistor ceramics were sintered at 750 degrees C, 770 degrees C or 900 ...
Cavitation resistance of refractory concrete: Influence of sintering temperature
(Elsevier Sci Ltd, Oxford, 2013)
The purpose of this study was to investigate possible application of refractory concrete in conditions of cavitation effect where the metal materials are usually applied. Also, influence of different sintering temperatures ...
Monolithic nanocrystalline SiC ceramics
(Elsevier Sci Ltd, Oxford, 2016)
Additive-free beta-SiC nanopowders were densified by using high-pressure "anvil-type with hollows" apparatus at the pressure of 4 GPa in the range of 1500-1900 degrees C. The starting powder with average particle size of ...
Strontium titanate films prepared by spray pyrolysis
(Elsevier Sci Ltd, Oxford, 2004)
Strontium titanate thin films were prepared by spray pyrolysis technique. Deposition parameters, such as solution concentration, time and temperature of deposition, and flow rate of carrier gas were optimized to obtain ...
Principal component analysis of morphological descriptors for monitoring surface defects induced by thermal shock
(Elsevier Ltd, 2021)
Pattern recognition techniques are applied to various morphological descriptors to monitor the formation and propagation of surface defects of materials subjected to thermal shock. A low-cement high-alumina castable was ...
Microstructural investigation of the PZT films prepared from the suspension of nanocrystalline powders
(Elsevier Sci Ltd, Oxford, 2004)
PZT thin films of composition Pb(Zr0.52Ti0.48)O-3 were prepared by a novel method from the suspension of nanocrystalline PZT powders. The powders were obtained by mechanochemical synthesis. Films were deposited on silicon ...
Optimization of processing parameters for preparation of LaNiO3 thin films from the citrate precursors
(Elsevier Sci Ltd, Oxford, 2007)
Lanthanum nickel oxide (LaNiO3) is an electrically conductive ceramics, which has a potential use as electrode for ferroelectric thin films, multilayer actuators and many other electronic devices. In this work, LaNiO3 thin ...
Structural, ferroelectric and magnetic properties of BiFeO3 synthesized by sonochemically assisted hydrothermal and hydro-evaporation chemical methods
(Elsevier Sci Ltd, Oxford, 2016)
BiFeO3 powders were synthesized by sonochemically assisted hydrothermal and hydro-evaporation methods. The X-ray diffraction confirmed the presence of secondary phases, Bi25FeO39 and Bi2Fe4O9, in as prepared BiFeO3 powders. ...
The structural, electrical and optical properties of spark plasma sintered BaSn1-xSbxO3 ceramics
(Elsevier Sci Ltd, Oxford, 2020)
Antimony doped barium-stannate dense ceramic materials were synthesized using spark plasma sintering technique out of mechanically activated precursor powders. The influence of various Sb concentrations (x = 0.00 - 0.10) ...
Bioactive glass-apatite composite coating for titanium implant synthesized by electrophoretic deposition
(Elsevier Sci Ltd, Oxford, 2007)
Titanium and titanium alloys are widely used as materials for implants, because of their mechanical properties and nontoxic behaviour, but unfortunately, are bioinert. In order to solve this problem, the metal implant could ...