Претраживање
Приказ резултата 1-10 од 301
Characterization of glycidyl methacrylate based magnetic nanocomposites
(Savez hemijskih inženjera, Beograd, 2019)
Magnetic and non-magnetic macroporous crosslinked copolymers of glycidyl methacrylate and trimethylolpropane trimethacrylate were prepared by suspension copolymerization and functionalized with diethylenetriamine. The ...
Removal of Pb2+ from aqueous solution by P(HEA/IA) hydrogels
(Savez hemijskih inženjera, Beograd, 2016)
A series of poly(2-hydroxyethyl acrylate-co-itaconic acid), P(HEA/IA), hydrogels with different HEA/IA ratio, were synthesized using free radical crosslinking/copolymerization and investigated as sorbents for Pb2+ from ...
High temperature materials: properties, demands and applications
(Savez hemijskih inženjera, Beograd, 2020)
High-temperature materials are used in a wide range of industries and applications such as gas turbine engines for aircrafts, power and nuclear power plants, different types of furnaces, including blast furnaces, some fuel ...
Seam pipes for process industry - Fracture analysis by using ring-shaped specimens
(Savez hemijskih inženjera, Beograd, 2018)
Pipelines are commonly used in process industry for transport of fluids, as well as granular solids, due to their numerous advantages in comparison to other transportation means. Pipe integrity is essential for a reliable ...
Whey as a raw material for the production of functional beverages / Surutka kao sirovina za proizvodnju funkcionalnih napitaka
(Association of Chemical Engineers of Serbia, 2012)
One of the least utilized by-products of food industry, despite the great potential that is described, is the whey, which is obtained as a by-product of the technological process production of cheese and casein. The excess ...
Preparation and properties of hydrogen peroxide oxidized starch for industrial use
(Savez hemijskih inženjera, Beograd, 2020)
Oxidized starch, an additive used in paper manufacturing and products for construction industry, is usually produced using harmful oxidant, such as hypochlorites or periodates. In this study, a simple and efficient ...
Micromechanical analysis of fatigue and crack growth in carbon-fiber epoxy composites based on mechanical testing
(Savez hemijskih inženjera, Beograd, 2020)
The paper presents static and dynamic tests of carbon/epoxy composite materials with fiber orientation at 0 degrees/90 degrees and +/- 45 degrees. The main tensile properties were determined as a basis for subsequent dynamic ...
Validation of a novel perfusion bioreactor system in cancer research
(Savez hemijskih inženjera, Beograd, 2020)
Development of drugs is a complex, time- and cost-consuming process due to the lack of standardized and reliable characterization techniques and models. Traditionally, drug screening is based on in vitro analysis using ...
Remediation of environment contaminated by lead using synthetic and natural apatites / Stabilizacija zagađenja olovom korišćenjem sintetičkih i prirodnih apatita
(Association of Chemical Engineers of Serbia, 2001)
Lead contamination is an environmental concern due to its effect on human health. One of the ways of remediating lead contamination is the in situ stabilization of this heavy metal. This can be achieved by converting ...
The usage of optical fibers for damage detection in ballistic protection composite laminates / Upotreba optičkih vlakana za detekciju oštećenja kompozitnih laminata namenjenih za balističku zaštitu
(Association of Chemical Engineers of Serbia, 2006)
This paper describes the procedure of embedding fiber optic sensors in laminar thermoplastic composite material, as well as damage investigation after ballistic loading. Thermoplastic-reinforced composite materials were ...