Претраживање
Приказ резултата 1-10 од 15
Corrosion protection of aluminum by vinyltriethoxysilane coatings / Koroziona stabilnost prevlaka viniltrietoksisilana
(Engineering Society for Corrosion, Belgrade, Serbia, 2008)
In this work the influence of the deposition parameters, i.e. silane solution concentration, deposition time and curing time on the corrosion stability of vinyltriethoxysilane (VTES) coatings on aluminum was investigated. ...
Corrosion behavior of duplex polyaniline/epoxy coating on mild steel in 3% NaCl / Koroziono ponašanje dvoslojne polianilin/epoksidne prevlake na mekom čeliku u 3% rastvoru NaCl
(Association of Chemical Engineers of Serbia, 2005)
The corrosion behavior and thermal stability of epoxy coatings electrodeposited on mild steel and on mild steel with electrochemically deposited polyaniline (PANI) film were investigated by electrochemical impedance ...
Electrochemical properties and thermal stability of epoxy coatings electrodeposited on aluminium and modified aluminium surfaces / Elektrohemijske karakteristike i termička stabilnost epoksidnih kataforetskih prevlaka na aluminijumu i modifikovanim površinama aluminijuma
(Serbian Chemical Society, Belgrade, 2001)
The corrosion behavior of epoxy coatings electrodeposited on aluminum, as well as on electrochemically and chemically modified aluminum were investigated during exposure to 3 % NaCl. Electrochemical impedance spectroscopy ...
Electrochemical and sorption characteristics of metacryloxypropyltrimethoxysilane coatings / Elektrohemijske i sorpcione karakteristike prevlaka metakriloksipropiltrimetoksisilana
(Engineering Society for Corrosion, Belgrade, Serbia, 2008)
The aim of this work was to investigate the influence of deposition parameters (silane solution concentration, deposition time, curing time) on electrochemical and sorption characteristics of metacryloxypropyltrimethoxysilane ...
Electrochemical deposition and characterization of zinc-nickel alloys deposited by direct and reverse current / Elektrohemijsko taloženje i karakterizacija legura cink-nikal dobijenih konstantnom i reversnom strujom
(Serbian Chemical Society, Belgrade, 2005)
Zn-Ni alloys electrochemically deposited on steel under various deposition conditions were investigated. The alloys were deposited on a rotating disc electrode and on a steel panel from chloride solutions by direct and ...
Protective properties of epoxy coatings electrodeposited on steel electrochemically modified by Zn-Fe alloys / Zaštitna svojstva epoksidnih kataforetskih prevlaka na čeliku elektrohemijski modifikovanom Zn-Fe legurama
(Association of Chemical Engineers of Serbia, 2004)
Epoxy coatings were electrodeposited on steel and steel modified by Zn-Fe alloys using the constant voltage method. Zn-Fe alloys were electrodeposited on steel at different current densities. The effect of the Zn-Fe alloy ...
Electrochemical deposition and characterization of Zn-Fe alloys / Elektrohemijsko taloženje i karakterizacija Zn-Fe legura
(Serbian Chemical Society, Belgrade, 2004)
Zn–Fe alloy electrochemically deposited on steel under various deposition conditions were investigated using anodic linear sweep voltammetry (ALSV) and X-ray diffraction (XRD) analysis for phase structure determination, ...
(NH4)2SO4 corrosion of cement in concrete analyzed by an improved mathematical model / (NH4)2SO4 korozija cementa u betonu analizirana poboljšanim matematičkim modelom
(Serbian Chemical Society, Belgrade, 2009)
This paper gives a critical analysis of the equation that predicts and estimates the progress of degradation for various building materials, recently proposed by Matsufuji et al.1 After the analysis, the paper suggests an ...
Problems and prospect of Al-Mg alloys application in marine constructions
(Savez inženjera metalurgije Srbije, Beograd, 2006)
The position of steel as the most widely used material in the shipbuilding industry originates from the superior mechanical properties and low manufacturing costs The increasing demands for lowering the weight of different ...
Synthesis and electrochemical properties of polypyrrole, polyaniline and poly-3-methyl thiophene / Sinteza i elektrohemijska svojstva polipirola, polianilina i poli-3-metiltiofena
(Association of Chemical Engineers of Serbia, 2000)
In this article, the results of a study of the electrochemical polymerization of pyrrole and the chemical polymerization of pyrrole, aniline and 3-methyl thiophene initiated by FeCh are presented. The electrochemical ...