Претраживање
Приказ резултата 1-10 од 17
Epoxy coatings electrodeposited on aluminium and modified aluminium surfaces / Epoksidne kataforetske prevlake na aluminijumu i modifikovanim površinama aluminijuma
(Association of Chemical Engineers of Serbia, 2002)
The corrosion behaviour and thermal stability of epoxy coatings electrodeposited on modified aluminum surfaces (anodized, phosphatized and chromatized-phosphatized aluminium) were monitored during exposure to 3% NaCl ...
Characterization of oxide coatings formed by plasma electrolytic oxidation of aluminum in sodium tungstate / Karakterizacija oksidnih slojeva dobijenih plazma elektrolitičkom oksidacijom aluminijuma u natrijum volframatu
(Engineering Society for Corrosion, Belgrade, Serbia, 2013)
This paper presents our recent research on morphology and phase composition of oxide coatings formed by plasma electrolytic oxidation of aluminum in 0.1 M sodium tungstate at constant current density of 15 mA/cm2 and ...
The adhesion of epoxy cataphoretic coating on phosphatized hot-dip galvanized steel / Adhezija epoksidne kataforetske prevlake na fosfatiranom pocinkovanom čeliku
(Association of Chemical Engineers of Serbia, 2006)
The influence of hot-dip galvanized steel surface pretreatment on the adhesion of epoxy cataphoretic coating was investigated. Phosphate coatings were deposited on hot-dip galvanized steel and the influence of fluoride ...
Corrosion behavior of duplex polyaniline/epoxy coating on mild steel in 3% NaCl / Koroziono ponašanje dvoslojne polianilin/epoksidne prevlake na mekom čeliku u 3% rastvoru NaCl
(Association of Chemical Engineers of Serbia, 2005)
The corrosion behavior and thermal stability of epoxy coatings electrodeposited on mild steel and on mild steel with electrochemically deposited polyaniline (PANI) film were investigated by electrochemical impedance ...
Savremeni čelici - dvojnikovanjem izazvana plastičnost
(DUZS - Društvo za unapređivanje zavarivanja u Srbiji, Beograd, 2014)
A significant increase in the research activity dedicated to high manganese TWIP steels has occurred during the past few years, motivated by the breakthrough combination of strength and ductility possessed by these alloys. ...
Corrosion properties of an aluminium alloy 7000 series after a new two step precipitation hardening / Otpornost prema koroziji aluminijumske legure serije 7000 posle novog dvostepenog termičkog taloženja
(Engineering Society for Corrosion, Belgrade, Serbia, 2014)
Corrosion properties of an aluminium alloy 7000 series were investigated by different electrochemical methods. The alloy was subjected to the one-step and to a new two-step precipitation hardening. Polarization measurements ...
Laser cleaning of textile artifacts with metal threads: Process parameter optimization / Lasersko čišćenje tekstilnih eksponata sa korodiranim metalnim nitima - optimzacije parametara procesa
(Military Technical Institute, Belgrade, 2014)
This paper presents the results of the laser cleaning effects on textile samples with corroded metallic threads. In many museum collections, there are textile exhibits like uniforms, national costumes, flags and home ...
Electrochemical and surface characterization of ternary alloys of the system Ag-Cu-Zn in near neutral chloride solutions. / Elektrohemijska i površinska karakterizacija trokomponentnih legura sistema Ag-Cu-Zn u blisko neutralnim hloridnim rastvorima
(Univerzitet u Beogradu, Tehnički fakultet, Bor, 2015)
Alloys of the Ag-Cu-Zn system with wide range of silver content, selected to have similar phase compositions, were the subject of the research. Metals for all examined alloys are obtained by recycling of electronic waste. ...
Synthesis and electrochemical properties of polypyrrole, polyaniline and poly-3-methyl thiophene / Sinteza i elektrohemijska svojstva polipirola, polianilina i poli-3-metiltiofena
(Association of Chemical Engineers of Serbia, 2000)
In this article, the results of a study of the electrochemical polymerization of pyrrole and the chemical polymerization of pyrrole, aniline and 3-methyl thiophene initiated by FeCh are presented. The electrochemical ...
Protective properties of epoxy coatings electrodeposited on steel electrochemically modified by Zn-Fe alloys / Zaštitna svojstva epoksidnih kataforetskih prevlaka na čeliku elektrohemijski modifikovanom Zn-Fe legurama
(Association of Chemical Engineers of Serbia, 2004)
Epoxy coatings were electrodeposited on steel and steel modified by Zn-Fe alloys using the constant voltage method. Zn-Fe alloys were electrodeposited on steel at different current densities. The effect of the Zn-Fe alloy ...