Претраживање
Приказ резултата 1-10 од 27
Comparation of corrosion and mechanical properties of commercial and recycled 6060 and 6082 aluminium alloys
(Belgrade : Association of Metallurgical Engineers of Serbia (AMES), 2023)
Although the same quality of various metals from the recycling process is considered for granted, obtaining aluminum of high purity and aluminum alloys with identical properties as from production from pure raw materials ...
Precipitation of the beta-phase and corrosion behavior of an al-6.8 wt.% mg alloy
(John Wiley & Sons, Chichester, 2012)
This study was performed on the Al-Mg alloy with the chemical composition: Al-Mg6.8-Mn0.51-Fe0.2-Si0.1. As-received cold rolled material (O-temper) was subjected to (i) cold rolling and annealing at 265 degrees C and 320 ...
Protective properties of epoxy coatings electrodeposited on steel electrochemically modified by Zn-Ni alloys
(Elsevier Science Sa, Lausanne, 2004)
A review is given on Zn-Ni alloys electrochemically deposited on steel under various deposition conditions. The influence of deposition current density and type of deposition solution on the chemical content, phase structure ...
The influence of zinc surface pretreatment on the adhesion of epoxy coating electrodeposited on hot-dip galvanized steel
(Elsevier Science Sa, Lausanne, 2007)
The adhesion and electrochemical properties of epoxy coatings electrodeposited on hot-dip galvanized steel with and without passive films were investigated during exposure to 3% NaCl. The passive films were formed in hot ...
Corrosion behaviour of epoxy coatings electrodeposited on galvanized steel and steel modified by Zn-Ni alloys
(Elsevier Science Sa, Lausanne, 2000)
The electrochemical and transport properties and thermal stability of epoxy coatings electrodeposited on hot-dip galvanized steel and steel modified by Zn-Ni alloys were investigated during exposure to 3% NaCl solution. ...
Electrochemical deposition and characterization of Zn-Co alloys and corrosion protection by electrodeposited epoxy coating on Zn-Co alloy
(Pergamon-Elsevier Science Ltd, Oxford, 2002)
Zn-Co alloys electrochemically deposited on steel under various deposition conditions were investigated. The influence of deposition current density, temperature and composition of deposition solution on the phase structure ...
Electrochemical and sorption characteristics and thermal stability of epoxy coatings electrodeposited on steel modified by Zn-Co alloy
(Elsevier Science Sa, Lausanne, 2002)
The corrosion behaviour, transport properties and thermal stability of epoxy coatings electrodeposited on steel and steel modified by Zn-Co alloys were investigated during exposure to 3% NaCl solution. The electrochemical ...
The influence of steel surface modification by electrodeposited Zn-Fe alloys on the protective behaviour of an epoxy coating
(Elsevier Science Sa, Lausanne, 2003)
The electrochemical and transport properties of epoxy coatings electrodeposited on steel and steel modified by Zn-Fe alloys were investigated during exposure to 3% NaCl. The Zn-Fe alloys were deposited on steel surface ...
Mechanics of submerged jet cavitating action: material properties, exposure time and temperature effects on erosion
(Springer, New York, 2008)
Experimental setup with a submerged cavitating jet has been used for the study of influences of material, exposure time and working fluid temperature on the erosion process. Each of the parameters has been varied separately, ...
Corrosion studies on electrochemically deposited PANI and PANI/epoxy coatings on mild steel in acid sulfate solution
(Elsevier Science Sa, Lausanne, 2005)
The corrosion behavior of mild steel and mild steel covered by electrochemically deposited (a) polyaniline (PANI) film, (b) epoxy coating
and (c) PANI/epoxy coating system in 0.1 M sulfuric acid solution were investigated ...