Претраживање
Приказ резултата 1-10 од 1204
Microeconomics of the materials and energents consumption in a simulated copper casting process
(Edimet SpA, 2012)
An analytical model for the optimization of the consumption of materials and energents in a typical copper casting process based on a standard simulation procedure is presented. The proposed microeconomic analysis in ...
Effect of welded joint imperfection on the integrity of pipe elbows subjected to internal pressure
(University of Osijek, Tech Fac, Slavonski Brod, 2013)
Since local defects reduce the load-carrying capacity and deformation ability of a piping system, an analysis is undertaken to quantify the influence of weld defects on integrity of the pipe elbows subjected to internal ...
Removal of volatile organic compounds from activated carbon by thermal Desorption and catalytic combustion
(Maik Nauka/Interperiodica/Springer, New York, 2007)
The thermal desorption of saturated activated carbon discharged from an industrial adsorber and catalytic oxidation of desorbed products over a Pt/Al2O3 catalyst were investigated. The activated carbon is almost completely ...
Biomarkers of oil-type pollutants in surface soil
(Parlar Scientific Publications (P S P), Freising, 2003)
In this paper, biomarkers were applied for identification of oil-type pollutants in surface soil and their microbial changes were investigated. Samples were taken at destroyed fuel storage in Nis (Yugoslavia). Steranes, ...
Bioethanol production by immobilized Sacharomyces cerevisiae var. ellipsoideus cells
(African Journal of Biotechnology, 2009)
Bioethanol can be produced by fermentation of sugars from various waste agricultural materials. Whichever system for bioethanol production is chosen, the attention must be paid to the overall economics and energy consumption. ...
Mechanical and microstructural properties of the fly-ash-based geopolymer paste and mortar
(Institute of Metals and Technology, 2013)
In this paper we have investigated the influence of synthesis parameters on the mechanical properties of the fly-ash-based geopolymer paste and mortars. Moreover, the influence of an addition of limestone sand on the ...
Synthesis and characterization of copolymer hydrogels of chitosan, itaconic acid and N-isopropylacrylamide / Sinteza i karakterizacija kopolimernih hidrogelova hitozana, itakonske kiseline i N-izopropilakrilamida
(Association of Chemical Engineers of Serbia, 2011)
This paper deals with the synthesis of copolymer hydrogels of N-isopropylacrylamide, itaconic acid and chitosan. During synthesis, pH of the reaction solution and temperature were varied. It was found that the reaction at ...
Effect of non-stationary current regimes on the morphology of silver electrodeposits / Efekat nestacionarnih strujnih režima na morfologiju taloga srebra
(Serbian Chemical Society, Belgrade, 2009)
This work is concerned with the use of reverse current regimes in order to form small-grained and compact silver deposits during the electrorefining process. Several parameters were varied, i.e., i) anodic overpotential, ...
Solvent and structural effects on the kinetics of the reactions of cycloalkenylcarboxylic and cycloalkenylacetic acids with diazodiphenylmethane
(Wiley, Hoboken, 2005)
The rate constants for the reaction of different cycloalkenylcarboxylic, cycloalkenylacetic acids, and phenylacetic acid with diazodiphenylmethane were determined in 12 aprotic solvents at 30 degrees C. in order to explain ...
The influence of high and low temperatures on the impact properties of glass-epoxy composites / Uticaj visokih i niskih temperatura na udarna svojstva stakleno−epoksidnih kompozita
(Serbian Chemical Society, Belgrade, 2007)
The aim of this paper is to present the influence of high and low temperatures on the impact properties glass-epoxy composites. The impact strength an is presented for four different glass-epoxy composite structures at ...