Претраживање
Приказ резултата 1-10 од 73
Structural characteristics of some ternary Ag-In-Sn alloys
(Savez inženjera metalurgije Srbije, Beograd, 2008)
The Ag-In-Sn system, as one of potential lead-free solder materials, was studied in this paper. The investigated alloys were chosen from two sections, with molar ratio of In:Sn equal to 1:4; 1:2. DTA, XRD, SEM and micro ...
Characterization of thermal shock damage in cordierite-mullite refractory materials by non-destructive methods
(Savez inženjera metalurgije Srbije, Beograd, 2007)
Ultrasonic pulse velocity testing and image analysis were used to predict thermal stability of refractories. Two cordierite-mullite compositions used as substrates in fast firing of porcelain white ware characterized by ...
On the Al-Mg alloy sheets for automotive application: Problems and solutions
(Savez inženjera metalurgije Srbije, Beograd, 2004)
Aluminium alloys suitable for automotive application were reviewed briefly as well as the reasons for the future wider application of Al-Mg type alloys. Basic problems related to the limited consumption of Al-Mg type alloy ...
The influence of titanium and cerium on microstructure and properties of Fe-C-Cr-Nb alloys / Uticaj titana i cerijuma na mikrostrukturu i svojstva Fe-C-Cr-Nb legura
(Savez inženjera metalurgije Srbije, Beograd, 2005)
In this paper, the influence of titanium and cerium on the microstructure and properties of Fe-C-Cr-Nb alloys are examined, in both as-cast and heat treated state. These elements affect the crystallisation process of ...
Thermomechanical processing of micro alloyed steels in Sartid A.D.: Part III - comparison of of Tnr temperatures determined on laboratory and industrial scale / Termomehanička prerada mikrolegiranih čelika koncerna Sartid: III deo - poređenje Tnr temperatura određenih u laboratorijskim i industrijskim uslovima
(Savez inženjera metalurgije Srbije, Beograd, 2002)
The aim of this work was to compare the Tnr temperatures of microalloyed steels estimated on laboratory (Tnr**l) and industrial scale (Tnr**l). Laboratory and industrial scale are related to testing on high temperature ...
Depozition of thin films by CVD techniques / Nanošenje tankih filmova CVD postupcima
(Savez inženjera metalurgije Srbije, Beograd, 2004)
Chemical vapor deposition - (CVD) has rapidly grown in the last twenty years and applications of this fabrication process are now key elements in many industrial products, such as semiconductors, optoelectonics, optics, ...
Influence of heat transfer conditions on determination of thermal shock resistance of refractories / Uticaj prenosa toplote na određivanje termostabilnosti vatrostalnog materijala
(Savez inženjera metalurgije Srbije, Beograd, 2002)
The goal of this thesis was to determine the thermal shock resistance of alumina based refractories in the case of a heat transfer conditions different from the standard conditions given by quenching test JUS. B. D.8 319. ...
Dependence of the solid-liquid interface structure on the solidification process parameters / Zavisnost strukture granice faza tečno-čvrsto od parametara procesa očvršćavanja
(Savez inženjera metalurgije Srbije, Beograd, 2002)
Influence of the solidification rate, temperature gradient and initial concentration of the solute on the interface shape was investigated during solidification from the melt. The dependence of the microstructure on the ...
Image analysis of protective layer of zinc on steel obtained using the hot process / Analiza slike za karakterisanje zaštitnog sloja cinka na čeliku dobijenog toplim cinkovanjem
(Savez inženjera metalurgije Srbije, Beograd, 2003)
The procedure for measuring the thickness of anticorrosion protective layer of zinc on steel is given. The metallographic images are used for this measurement. Results are statistically handled and results are used to ...
Influence of Cu and Mn content on the properties of Al-Mg4.5-(Mn,Cu) type alloy sheets
(Savez inženjera metalurgije Srbije, Beograd, 2009)
Influence of Cu and Mn content on the grain structure, precipitation effects and mechanical properties of two Al-Mg4.5-(Mn,Cu) type sheets was considered. It was found that a variety of grain size can be obtained in alloy ...