Претраживање
Приказ резултата 1-10 од 108
The electrochemical deposition and corrosion stability of Zn-Mn alloy coatings / Elektrohemijsko taloženje i koroziona stabilnost prevlaka Zn-Mn legura
(Engineering Society for Corrosion, Belgrade, Serbia, 2010)
The influence of the type of the deposition solution on the current efficiency during electrodeposition of Zn-Mn alloys was examined. The Zn-Mn alloys were deposited on steel from chloride, sulphate and pyrophosphate plating ...
Polyphosphate glass as fertilizer for plant seedlings / Efekat primene polifosfatnog stakla u supstratima za gajenje cveća i povrća
(Engineering Society for Corrosion, Belgrade, Serbia, 2019)
Due to the dissolution properties the phosphate glasses can be promising materials for the development of new ecologically safe fertilizers. The complex polyphosphate glass with a molar ratio (M2O + MO)/P2O5 gt 1 and ...
Solvent influence on absorption spectra of food azo dyes / Uticaj rastvarača na apsorpcione spektre prehrambenih azo boja
(Engineering Society for Corrosion, Belgrade, Serbia, 2019)
The solvent influence on absorption spectra of food azo dyes was examined by the method of Linear Solvation Energy Relationships (LSER). For this purpose, six azo dyes were used: tartrazine (E 102), ponceau 4R (E 124), ...
Indentation behaviour of 'soft film on hard substrate' composite system type / Ponašanje kompozitnih sistema tipa 'mek film na tvrdom supstratu' na testu utiskivanja
(Engineering Society for Corrosion, Belgrade, Serbia, 2015)
This investigation has been carried out in order to analyse and compare the hardness response of different composite systems of the same type, named 'soft film on hard substrate' composite system. Composite systems of mono- ...
Uticaj gustine izmene za procese taloženja na nastajanje tankog površinskog sloja metala na nesrodnoj podlozi
(Engineering Society for Corrosion, Belgrade, Serbia, 2005)
Electroplating could be defined as a group of procedures in which metal surfaces (sometime nonmetals) transforms, so the surface properties are changed from base materials to the deposited metal. This goal can be achieved ...
Corrosion studies on electrochemically deposited polyaniline and polyaniline/epoxy coatings on mild steel in acid sulfate solution / Koroziono ispitivanje elektrohemijski taloženog polianilina i polianilina/epoksi prevlaka na mekom čeliku u rastvoru sumporne kiseline
(Engineering Society for Corrosion, Belgrade, Serbia, 2004)
The corrosion behavior of mild steel, mild steel covered by electrochemically deposited polyaniline (PANI) film, epoxy coating and PANI/epoxy coating system in 0.1 M sulfuric acid solution, were investigated by electrochemical ...
Nanostructured intrinsically conducting polymers formed by electrochemical synthesis / Nanostruktuirani elektroprovodni polimeri dobijeni elektrohemijskom sintezom
(Engineering Society for Corrosion, Belgrade, Serbia, 2016)
Due to unique properties of intrinsically conducting polymers (ICP) such as: electrical conductivity, reversible electrochemistry, optical activity, biocompatibility, environmental and corrosion stability, they still ...
Electrochemical and sorption characteristics of metacryloxypropyltrimethoxysilane coatings / Elektrohemijske i sorpcione karakteristike prevlaka metakriloksipropiltrimetoksisilana
(Engineering Society for Corrosion, Belgrade, Serbia, 2008)
The aim of this work was to investigate the influence of deposition parameters (silane solution concentration, deposition time, curing time) on electrochemical and sorption characteristics of metacryloxypropyltrimethoxysilane ...
The influence of hot-dip galvanized steel surface pretreatment on the adhesion of epoxy coating / Uticaj pripreme površine pocinkovanog čelika na adheziju epoksidne prevlake
(Engineering Society for Corrosion, Belgrade, Serbia, 2007)
The influence of hot-dip galvanized steel surface pretreatment on the adhesion of epoxy cataphoretic coating was investigated. Several passive films were formed on hot-dip galvanized steel (phosphate, chromate and oxide). ...
Investigation of the anodic behaviour of mild steel in different solutions as a base for the selection of suitable electrolyte for the synthesis of electro conducting polymer films / Ispitivanje anodnog ponašanja mekog čelika u različitim rastvorima u cilju izbora elektrolita za elektrohemijsku sintezu filmova elektroprovodnih polimera
(Engineering Society for Corrosion, Belgrade, Serbia, 2002)
In this paper the anodic behavior of mild steel in the different solutions of the organic and the inorganic electrolytes, with the aim to select the electrolyte for the electrochemical synthesis of electro conducting polymer ...