Приказ основних података о документу

dc.creatorKamberović, Željko
dc.creatorKorać, Marija
dc.creatorIvšić, Dragana
dc.creatorNikolić, Vesna
dc.creatorRanitović, Milisav
dc.date.accessioned2021-03-10T11:01:28Z
dc.date.available2021-03-10T11:01:28Z
dc.date.issued2009
dc.identifier.issn0354-6306
dc.identifier.urihttp://TechnoRep.tmf.bg.ac.rs/handle/123456789/1371
dc.description.abstractUsed electronic equipment became one of the fastest growing waste streams in the world. In the past two decades recycling of printed circuit boards (PCBs) has been based on pyrometallurgy, highly polluting recycling technology which causes a variety of environmental problems. The most of the contemporary research activities on recovery of base and precious metals from waste PCBs are focused on hydrometallurgical techniques as more exact, predictable and easily controlled. In this paper mechanically pretreated PCBs are leached with nitric acid. Pouring density, percentage of magnetic fraction, particle size distribution, metal content and leach ability are determined using optical microscopy, atomic absorption spectrometry (AAS), X-ray fluorescent spectrometry (XRF) and volumetric analysis. Three hydrometallurgical process options for recycling of copper and precious metals from waste PCBs are proposed and optimized: the use of selective leachants for recovery of high purity metals (fluoroboric acid, ammonia-ammonium salt solution), conventional leachants (sulphuric acid, chloride, cyanide) and eco-friendly leachants (formic acid, potassium persulphate). Results presented in this paper showed that size reduction process should include cutting instead of hammer shredding for obtaining suitable shape & granulation and that for further testing usage of particle size -3 +0.1mm is recommended. Also, Fe magnetic phase content could be reduced before hydro treatment.en
dc.publisherSavez inženjera metalurgije Srbije, Beograd
dc.rightsopenAccess
dc.sourceMetalurgija
dc.subjectelectronic wasteen
dc.subjectprinted circuit boardsen
dc.subjectrecyclingen
dc.subjecthydrometallurgyen
dc.subjectcopperen
dc.subjectprecious metalsen
dc.titleHydrometallurgical process for extraction of metals from electronic waste, Part I: Material characterization and process option selectionen
dc.typearticle
dc.rights.licenseARR
dc.citation.epage243
dc.citation.issue4
dc.citation.other15(4): 231-243
dc.citation.rankM24
dc.citation.spage231
dc.citation.volume15
dc.identifier.fulltexthttp://TechnoRep.tmf.bg.ac.rs/bitstream/id/10885/v_manojlovic,+3_Kamberovic_MJoM_1504.pdf
dc.identifier.rcubhttps://hdl.handle.net/21.15107/rcub_technorep_1371
dc.type.versionpublishedVersion


Документи

Thumbnail

Овај документ се појављује у следећим колекцијама

Приказ основних података о документу