Design and optimization of purification procedure for biodiesel washing
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
Almost complete methanolysis of triglycerides is usually not enough to fulfil the strict standards of biodiesel quality. A key step in this process is neutralization of alkali (catalyst) followed by the washing procedure necessary for removing different impurities such as traces of catalyst and methanol and removal of soaps and glycerol from esters phase. The washing with hot water is still widely used in many industrial units for the biodiesel production. In this study, different procedures of biodiesel washing using hot water were investigated. The orto-phosphoric acid was suggested as the best compound for alkali catalyst (sodium hydroxide) neutralization. The main goal of the performed analysis was to minimize the water usage in the washing-neutralization step during the biodiesel production. Such solution would make the process of biodiesel synthesis more economical taking into account the decrease of energy consumed for evaporation of water during the final product purification, ...as well as more acceptable procedure related to the impact on environment (minimal waste water release). Results of the performed simulation of the washing process supported by original experimental data suggested that neutralization after the optimized washing process of the methyl ester layer could be the best solution. The proposed washing procedure significantly decreases the amount of waste water giving at the same time the desired purity of final products (biodiesel and glycerol). The simulation of the process was performed using ASPEN plus software supported by ELCANTREL and UNIQUAC procedure of required properties calculation.
Кључне речи:
biodiesel / washing of biodiesel / process intensification / catalyst neutralizationИзвор:
Chemical Industry & Chemical Engineering Quarterly, 2009, 15, 3, 159-168Издавач:
- Association of the Chemical Engineers of Serbia
Финансирање / пројекти:
- Projekat Ministarstva nauke Republike Srbije, br. TR19062 i ON142073
- Изоловање, карактеризација, биолошка активност и трансформација природних једињења и синтеза катализатора применом наткритичних флуида, микроталаса и ултразвука (RS-142073)
DOI: 10.2298/CICEQ0903159G
ISSN: 1451-9372
WoS: 000271301200007
Scopus: 2-s2.0-74049086590
Институција/група
Tehnološko-metalurški fakultetTY - JOUR AU - Glišić, Sandra AU - Skala, Dejan PY - 2009 UR - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/1449 AB - Almost complete methanolysis of triglycerides is usually not enough to fulfil the strict standards of biodiesel quality. A key step in this process is neutralization of alkali (catalyst) followed by the washing procedure necessary for removing different impurities such as traces of catalyst and methanol and removal of soaps and glycerol from esters phase. The washing with hot water is still widely used in many industrial units for the biodiesel production. In this study, different procedures of biodiesel washing using hot water were investigated. The orto-phosphoric acid was suggested as the best compound for alkali catalyst (sodium hydroxide) neutralization. The main goal of the performed analysis was to minimize the water usage in the washing-neutralization step during the biodiesel production. Such solution would make the process of biodiesel synthesis more economical taking into account the decrease of energy consumed for evaporation of water during the final product purification, as well as more acceptable procedure related to the impact on environment (minimal waste water release). Results of the performed simulation of the washing process supported by original experimental data suggested that neutralization after the optimized washing process of the methyl ester layer could be the best solution. The proposed washing procedure significantly decreases the amount of waste water giving at the same time the desired purity of final products (biodiesel and glycerol). The simulation of the process was performed using ASPEN plus software supported by ELCANTREL and UNIQUAC procedure of required properties calculation. PB - Association of the Chemical Engineers of Serbia T2 - Chemical Industry & Chemical Engineering Quarterly T1 - Design and optimization of purification procedure for biodiesel washing EP - 168 IS - 3 SP - 159 VL - 15 DO - 10.2298/CICEQ0903159G ER -
@article{ author = "Glišić, Sandra and Skala, Dejan", year = "2009", abstract = "Almost complete methanolysis of triglycerides is usually not enough to fulfil the strict standards of biodiesel quality. A key step in this process is neutralization of alkali (catalyst) followed by the washing procedure necessary for removing different impurities such as traces of catalyst and methanol and removal of soaps and glycerol from esters phase. The washing with hot water is still widely used in many industrial units for the biodiesel production. In this study, different procedures of biodiesel washing using hot water were investigated. The orto-phosphoric acid was suggested as the best compound for alkali catalyst (sodium hydroxide) neutralization. The main goal of the performed analysis was to minimize the water usage in the washing-neutralization step during the biodiesel production. Such solution would make the process of biodiesel synthesis more economical taking into account the decrease of energy consumed for evaporation of water during the final product purification, as well as more acceptable procedure related to the impact on environment (minimal waste water release). Results of the performed simulation of the washing process supported by original experimental data suggested that neutralization after the optimized washing process of the methyl ester layer could be the best solution. The proposed washing procedure significantly decreases the amount of waste water giving at the same time the desired purity of final products (biodiesel and glycerol). The simulation of the process was performed using ASPEN plus software supported by ELCANTREL and UNIQUAC procedure of required properties calculation.", publisher = "Association of the Chemical Engineers of Serbia", journal = "Chemical Industry & Chemical Engineering Quarterly", title = "Design and optimization of purification procedure for biodiesel washing", pages = "168-159", number = "3", volume = "15", doi = "10.2298/CICEQ0903159G" }
Glišić, S.,& Skala, D.. (2009). Design and optimization of purification procedure for biodiesel washing. in Chemical Industry & Chemical Engineering Quarterly Association of the Chemical Engineers of Serbia., 15(3), 159-168. https://doi.org/10.2298/CICEQ0903159G
Glišić S, Skala D. Design and optimization of purification procedure for biodiesel washing. in Chemical Industry & Chemical Engineering Quarterly. 2009;15(3):159-168. doi:10.2298/CICEQ0903159G .
Glišić, Sandra, Skala, Dejan, "Design and optimization of purification procedure for biodiesel washing" in Chemical Industry & Chemical Engineering Quarterly, 15, no. 3 (2009):159-168, https://doi.org/10.2298/CICEQ0903159G . .