Show simple item record

dc.creatorČabrić, Branislav
dc.creatorDanilović, Nebojša
dc.creatorJanićijević, Aco
dc.date.accessioned2021-03-10T11:26:16Z
dc.date.available2021-03-10T11:26:16Z
dc.date.issued2011
dc.identifier.issn0044-7749
dc.identifier.urihttp://TechnoRep.tmf.bg.ac.rs/handle/123456789/1750
dc.description.abstractThe cooler allows easy regulation of simultaneous crystallization tests of different crystallization parameters and substances, with the purpose of obtaining crystals from a family of newly synthesized compounds with a layered crystal structure. The procedure involves first increasing the voltage until the substances are completely melted. Then, while a constant furnace voltage is maintained, a small amount of airflow is introduced into the cooler. As a result, crystallization starts on the surface of the melts for the lower row and at the bottom of the melts for the upper row. The crystallization rate interval in each Tamman test tube is regulated by the cross-section of the airflow. Different temperature gradients in the crucibles can be tested simultaneously using an inclined cooler. Tamman test tubes and plugs of various shapes and dimensions can be mounted and thus tested at the same time. Several coolers or a planar air cooler with several columns of plugs can be installed in a chamber furnace (crystallization board).
dc.rightsrestrictedAccess
dc.sourceAmerican Laboratory
dc.titleSimultaneous Crystallization Testing in a Laboratory Furnaceen
dc.typearticle
dc.rights.licenseARR
dc.citation.epage19
dc.citation.issue7
dc.citation.other43(7): 18-19
dc.citation.rankM23
dc.citation.spage18
dc.citation.volume43
dc.identifier.pmid
dc.identifier.rcubhttps://hdl.handle.net/21.15107/rcub_technorep_1750
dc.identifier.scopus2-s2.0-79960078650
dc.identifier.wos000292347000005
dc.type.versionpublishedVersion


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record