Show simple item record

dc.creatorMarković, Radmila
dc.creatorJugović, Branimir
dc.creatorGvozdenović, Milica
dc.creatorStevanović, Jasmina
dc.creatorStevanović, Z.
dc.creatorBugarin, Mile
dc.date.accessioned2021-03-10T11:27:48Z
dc.date.available2021-03-10T11:27:48Z
dc.date.issued2011
dc.identifier.urihttp://TechnoRep.tmf.bg.ac.rs/handle/123456789/1774
dc.description.abstractThis paper addresses on investigation the possibility of electrolytic treatment the sulphur acidic waste solution, obtained in the conventional electrolytic copper refining process. The copper anodes with non-standard nickel, lead, tin and antimony content were specially prepared for the refining process. Nickel content of all anodes was approximately 7.5 mass %, and the content of lead, tin and antimony was varied. It was observed, that anodes with O2 content lower than 200 ppm, were not passivated. Results, obtained using the standard electrochemical techniques, have indicated that the anodes with non-standard chemical composition could be used under the same conditions as well as in the conventional copper refining process.en
dc.publisherTatranské Matliare : Slovak Society of Chemical Engineering
dc.relationinfo:eu-repo/grantAgreement/MESTD/Technological Development (TD or TR)/37001/RS//
dc.rightsopenAccess
dc.rights.urihttps://creativecommons.org/licenses/by-nc-nd/4.0/
dc.sourceProceedings of the 38th International Conference of Slovak Society of Chemical Engineering
dc.subjectnon-standard copper anodesen
dc.subjectelectrorefiningen
dc.subjectsulphur acidic waste solutionen
dc.subjectalloying elementsen
dc.titleAnalyzing the corrosion characteristics of anodes used for the sulphur acidic waste water treatmenten
dc.typeconferenceObject
dc.rights.licenseBY-NC-ND
dc.citation.epage975
dc.citation.other: 972-975
dc.citation.spage972
dc.identifier.fulltexthttp://TechnoRep.tmf.bg.ac.rs/bitstream/id/345/1771.pdf
dc.identifier.rcubcer-2617
dc.type.versionpublishedVersion


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record