Influence of crack length on ductile fracture initiation in welded joints with one and two weld metals
Само за регистроване кориснике
2011
Конференцијски прилог (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
Among various micromechanical models for ductile fracture analysis using local approach, those based on the Gurson plastic flow criterion have been intensively developed in the past three decades. However, their application is still subject of many researches, with the aim to improve the assessment of ductile fracture in various, mainly metallic, materials. In this work, Gurson criterion is applied to welded joints produced with one or two different weld metals (one of these is overmatched, while the other is undermatched). Welded single-edge notched bend (SENB) specimens are examined, with an initial pre-crack located in the symmetry plane of each joint. Local approach is chosen for assessment of behaviour of the joints under the external loading, to capture the effect of material inhomogeneity and initial crack length on deformation and ductile fracture initiation in analysed specimens.
Кључне речи:
Welded joints / constraint / micromechanical models / ductile fracture / Gurson yield criterionИзвор:
Materials Structure & Micromechanics of Fracture, 2011, 465, 578-+Издавач:
- Trans Tech Publications Ltd, Durnten-Zurich
Финансирање / пројекти:
- Serbian Ministry of Science under the project Eureka [E! 5348 OLMOST]
- Специјалне теме механике лома материјала (RS-MESTD-MPN2006-2010-144027)
- Микромеханички критеријуми оштећења и лома (RS-MESTD-Basic Research (BR or ON)-174004)
DOI: 10.4028/www.scientific.net/KEM.465.578
ISBN: 978-303785006-0
ISSN: 1013-9826
WoS: 000291704700136
Scopus: 2-s2.0-79952849378
Институција/група
Tehnološko-metalurški fakultetTY - CONF AU - Međo, Bojan AU - Rakin, Marko AU - Gubeljak, Nenad AU - Predan, J. AU - Arsić, Miodrag AU - Sedmak, Aleksandar PY - 2011 UR - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/1949 AB - Among various micromechanical models for ductile fracture analysis using local approach, those based on the Gurson plastic flow criterion have been intensively developed in the past three decades. However, their application is still subject of many researches, with the aim to improve the assessment of ductile fracture in various, mainly metallic, materials. In this work, Gurson criterion is applied to welded joints produced with one or two different weld metals (one of these is overmatched, while the other is undermatched). Welded single-edge notched bend (SENB) specimens are examined, with an initial pre-crack located in the symmetry plane of each joint. Local approach is chosen for assessment of behaviour of the joints under the external loading, to capture the effect of material inhomogeneity and initial crack length on deformation and ductile fracture initiation in analysed specimens. PB - Trans Tech Publications Ltd, Durnten-Zurich C3 - Materials Structure & Micromechanics of Fracture T1 - Influence of crack length on ductile fracture initiation in welded joints with one and two weld metals EP - + SP - 578 VL - 465 DO - 10.4028/www.scientific.net/KEM.465.578 ER -
@conference{ author = "Međo, Bojan and Rakin, Marko and Gubeljak, Nenad and Predan, J. and Arsić, Miodrag and Sedmak, Aleksandar", year = "2011", abstract = "Among various micromechanical models for ductile fracture analysis using local approach, those based on the Gurson plastic flow criterion have been intensively developed in the past three decades. However, their application is still subject of many researches, with the aim to improve the assessment of ductile fracture in various, mainly metallic, materials. In this work, Gurson criterion is applied to welded joints produced with one or two different weld metals (one of these is overmatched, while the other is undermatched). Welded single-edge notched bend (SENB) specimens are examined, with an initial pre-crack located in the symmetry plane of each joint. Local approach is chosen for assessment of behaviour of the joints under the external loading, to capture the effect of material inhomogeneity and initial crack length on deformation and ductile fracture initiation in analysed specimens.", publisher = "Trans Tech Publications Ltd, Durnten-Zurich", journal = "Materials Structure & Micromechanics of Fracture", title = "Influence of crack length on ductile fracture initiation in welded joints with one and two weld metals", pages = "+-578", volume = "465", doi = "10.4028/www.scientific.net/KEM.465.578" }
Međo, B., Rakin, M., Gubeljak, N., Predan, J., Arsić, M.,& Sedmak, A.. (2011). Influence of crack length on ductile fracture initiation in welded joints with one and two weld metals. in Materials Structure & Micromechanics of Fracture Trans Tech Publications Ltd, Durnten-Zurich., 465, 578-+. https://doi.org/10.4028/www.scientific.net/KEM.465.578
Međo B, Rakin M, Gubeljak N, Predan J, Arsić M, Sedmak A. Influence of crack length on ductile fracture initiation in welded joints with one and two weld metals. in Materials Structure & Micromechanics of Fracture. 2011;465:578-+. doi:10.4028/www.scientific.net/KEM.465.578 .
Međo, Bojan, Rakin, Marko, Gubeljak, Nenad, Predan, J., Arsić, Miodrag, Sedmak, Aleksandar, "Influence of crack length on ductile fracture initiation in welded joints with one and two weld metals" in Materials Structure & Micromechanics of Fracture, 465 (2011):578-+, https://doi.org/10.4028/www.scientific.net/KEM.465.578 . .