Search
Now showing items 11-19 of 19
Korozija metala - šta je to?
(Engineering Society for Corrosion, Belgrade, Serbia, 2004)
Korozija materijala je opšte poznat i prihvaćen izraz, ali da li se baš tačno zna šta je korozija? Pod pojmom korozija materijala se podrazumeva svako neželjeno razaranje materijala kao posledice delovanja spoljne sredine. ...
Electrochemical synthesis and corrosion behavior of thin polyaniline film on mild steel / Elektrohemijska sinteza i koroziono ponašanje tankih filmova polianilina na mekom čeliku
(Engineering Society for Corrosion, Belgrade, Serbia, 2003)
The electrochemical synthesis of polyaniline (PANI) on mild steel from the sodium-benzoate solutions has been investigated. It has been concluded that thin, highly adherent, polyaniline films could be obtained by anodic ...
The influence of hot-dip galvanized steel surface pretreatment on the adhesion of epoxy coating / Uticaj pripreme površine pocinkovanog čelika na adheziju epoksidne prevlake
(Engineering Society for Corrosion, Belgrade, Serbia, 2007)
The influence of hot-dip galvanized steel surface pretreatment on the adhesion of epoxy cataphoretic coating was investigated. Several passive films were formed on hot-dip galvanized steel (phosphate, chromate and oxide). ...
Characterization of electrochemically synthesized pani on graphite electrode for potential use in electrochemical power sources / Elektrohemijska sinteza i karakterizacija elektrode od polianilina za potencijalnu upotrebu u elektrohemijskim izvorima energije
(Inženjersko društvo za koroziju, Beograd, 2009)
Polyaniline (PANI) on graphite electrode was synthesized electrochemically under galvanostatic condition at current density of 2.0 mA cm-2 from aqueous solution of 1.0 moldm-3 HCl and 0.25 mol dm-3 aniline monomer. ...
Characterization of electrochemically synthesized pani on graphite electrode for potential use in electrochemical power sources / Elektrohemijska sinteza i karakterizacija elektrode od polianilina za potencijalnu upotrebu u elektrohemijskim izvorima energije
(Engineering Society for Corrosion, Belgrade, Serbia, 2009)
Polyaniline (PANI) on graphite electrode was synthesized electrochemically under galvanostatic condition at current density of 2.0 mA cm-2 from aqueous solution of 1.0 moldm-3 HCl and 0.25 mol dm-3 aniline monomer. ...
Formation of approximate differential equations for electrical and molar conductivity determinations of sulfuric acid aqueous solution / Formiranje aproksimacionih diferencijalnih jednačina za određivanje električne i molarne provodljivosti vodenog rastvora sumporne kiseline
(Engineering Society for Corrosion, Belgrade, Serbia, 2005)
In this paper formation of linear differential equations for approximate determination of electrical and molar conductivity of sulfuric-acid solutions, has been give.
Corrosion protection of aluminum by vinyltriethoxysilane coatings / Koroziona stabilnost prevlaka viniltrietoksisilana
(Engineering Society for Corrosion, Belgrade, Serbia, 2008)
In this work the influence of the deposition parameters, i.e. silane solution concentration, deposition time and curing time on the corrosion stability of vinyltriethoxysilane (VTES) coatings on aluminum was investigated. ...
Investigation of the anodic behaviour of mild steel in different solutions as a base for the selection of suitable electrolyte for the synthesis of electro conducting polymer films / Ispitivanje anodnog ponašanja mekog čelika u različitim rastvorima u cilju izbora elektrolita za elektrohemijsku sintezu filmova elektroprovodnih polimera
(Engineering Society for Corrosion, Belgrade, Serbia, 2002)
In this paper the anodic behavior of mild steel in the different solutions of the organic and the inorganic electrolytes, with the aim to select the electrolyte for the electrochemical synthesis of electro conducting polymer ...
The influence of impurities and theirs removal in the electrochemical measurements / Uticaj nečistoća i njihovo uklanjanje u elektrohemijskim merenjima
(Engineering Society for Corrosion, Belgrade, Serbia, 2002)
In this paper the different kind of impurities which can have the influences on electrochemical (corrosion) measurements in the electrolytic solutions, as well as the methods of theirs removal, has been given.