Претраживање
Приказ резултата 11-20 од 625
Nb-doped TiO2 as a support of Pt and Pt-Ru anode catalyst for PEMFCs
(Elsevier Science Sa, Lausanne, 2010)
TiO2 doped by 0.5% Nb was synthesized by the acid-catalyzed sol-gel method. BET surface area was determined to be 72 m(2) g(-1). XRD measurements showed that TiO2 has structure of anatase with similar to 13 nm average ...
Tryptophan-functionalized gold nanoparticles for deep UV imaging of microbial cells
(Elsevier Science Bv, Amsterdam, 2015)
Biocompatible fluorescent nanostructures were prepared by a functionalization of gold nanoparticles with the amino acid tryptophan. The gold-tryptophan bioconjugates were investigated by TEM and HRTEM and various spectroscopy ...
Validation of energy-dispersive X-ray fluorescence procedure for determination of major and trace elements present in the cement based composites
(Elsevier B.V., 2019)
Adjustment and subsequent validation of energy-dispersive X-ray fluorescence (ED-XRF) method for cement based binders with addition of mineral raw materials (fly ash, zeolite and bentonite) was conducted. Eighteen chemical ...
Improved Properties of Oxygen and Argon RF Plasma-Activated Polyester Fabrics Loaded with TiO2 Nanoparticles
(Amer Chemical Soc, Washington, 2010)
The potentials of low-pressure capacitively coupled RF oxygen and argon plasmas for the activation of polyester fibers surface that can enhance the deposition of colloidal TiO2 nanoparticles were discussed. SEM and XPS ...
The influence of different components on interpenetrating polymer network's (IPN's) characteristics as automotive top coats
(Elsevier Science Sa, Lausanne, 2010)
The aim of this study was to investigate the influence of different components of interpenetrating polymer networks (IPNs) on their behavior in dual curing automotive applications. Dual curing is one of possible ways to ...
Some Properties of Antimicrobial Coated Knitted Textile Material Evaluation
(Sage Publications Ltd, London, 2010)
The aim of this work was to investigate the antimicrobial activity of knitted fabric intended for medical purposes as well as the influence of antimicrobial treatment on the compression work, volume resistivity, water ...
Microwave sintering of fine grained HAP and HAP/TCP bioceramics
(Elsevier Sci Ltd, Oxford, 2010)
The effect of microwave sintering conditions on the microstructure, phase composition and mechanical properties of materials based on hydroxyapatite (HAP) and tricalcium phosphate (TCP) was investigated. Fine grained ...
The influence of tin and silver as microstructure modifiers on the corrosion rate of Pb-Ca alloys in sulfuric acid solutions
(Wiley-VCH Verlag Gmbh, Weinheim, 2010)
The effect of microstructure modifiers, Sn and Ag, on the corrosion rate of commercial Pb-Ca alloy in H(2)SO(4) electrolyte was investigated by the potentiodynamic polarization and by the weight loss corrosion rate measurement ...
Corrosion stability of Zn-Co alloys deposited from baths with high and low Co content - The influence of deposition current density
(Elsevier Science Sa, Lausanne, 2010)
Electrochemically deposited Zn-Co alloys under various deposition conditions were investigated using atomic absorption spectroscopy (AAS) for determination of chemical composition, anodic linear sweep voltammetry (ALSV) ...
Chitosan, itaconic acid and poly(vinyl alcohol) hybrid polymer networks of high degree of swelling and good mechanical strength
(Wiley, Hoboken, 2010)
Chitosan is a biodegradable, non-toxic, biocompatible polymer convenient for use in drug delivery. In this study, hybrid polymeric networks (HPNs) based on chitosan, itaconic acid and poly(vinyl alcohol) (PVA) were prepared ...