Search
Now showing items 31-40 of 74
Influence of microwave irradiation on hypochlorite decolorisation of synthetic dyes / Uticaj mikrotalasnog zračenja na obezbojavanje sintetskih boja hipohloritom
(Engineering Society for Corrosion, Belgrade, Serbia, 2016)
In this study three synthetic dyes were treated using hypochlorite or combination of hypochlorite and microwave irradiation in order to investigate factors which determine decolorisation of the investigated compounds. An ...
Micromechanical crack analysis of glass-epoxy laminated composites subjected to tension load / Mikromehanička analiza loma laminatnog staklo-epoksi kompozitnog materijala ispitivanog na zatezanje
(Engineering Society for Corrosion, Belgrade, Serbia, 2015)
The main objective of this study is to determine tensile properties of the glass-epoxy polymer composite material. The material is glass fiber 280 g/m², 'twill woven' with 100 cm width, type - Interglas 92125, and epoxy ...
The influence of light on corrosion of polyaniline coated mild steel / Uticaj osvetljenosti na koroziju mekog čelika sa prevlakom polianilina
(Engineering Society for Corrosion, Belgrade, Serbia, 2016)
The influence of light of the mild steel corrosion in 3% NaCl solution with polyaniline coating based on the possibilities that polyaniline can generate photoelectrons, even in the laboratory conditions has been investigated.
Influence of the structural changes on cavitation resistance of Al18SiCuMg alloy produced by rheocasting process / Uticaj strukturnih promena na kavitacionu otpornost Al18SiCuMg legure proizvedene reokasting procesom
(Engineering Society for Corrosion, Belgrade, Serbia, 2015)
The influence of stirring speeds of 1000 and 1500 r/min on the microstructure of Al18SiCuMg alloy was investigated. The smaller size of Si particles of rheocast sample obtained by higher cooling rate and higher stirring ...
Techno-economic analysis of unsaturated polyester production from waste PET / Tehno-ekonomska analiza proizvodnje nezasićenih poliestara iz otpadnog PET-a
(Engineering Society for Corrosion, Belgrade, Serbia, 2016)
Unsaturated polyester resins (UPe) were synthesized from maleic anhydride and products of glycolysis, obtained by polyethylene terephthalate (PET) depolymerization with dipropylene glycol (DPG) in the presence of tetrabutyl ...
PtAu catalyst with enhanced activity for formic acid oxidation / PtAu katalizator sa poboljšanom aktivnošću za reakciju oksidacije mravlje kiseline
(Engineering Society for Corrosion, Belgrade, Serbia, 2018)
PtAu systems are recognized as good catalysts for the oxidation of formic acid electrooxidation, which is investigated as a possible anodic reaction in low-temperature fuel cells. In this research, bimetallic PtAu ...
Production of rubber plasticizers based on waste PET: Techno-economical aspect / Sinteza plastifikatora iz otpadnog PET-a za primenu u gumenim proizvodima - tehno-ekonomska analiza
(Engineering Society for Corrosion, Belgrade, Serbia, 2017)
Production of rubber plasticizers, based on waste poly(ethylene terephthalate) (PET), and economic effectiveness of developed technologies are presented and discussed. Waste PET glycolyzates, named diisononyl terephthalate(DINTP), ...
Alkyd nanocomposite coatings based on waste pet glicolyzates and modified silica nanoparticles / Alkid nanokompozitni premazi bazirani na otpadnim pet glikolizatima modifikovani nanočesticama silike
(Engineering Society for Corrosion, Belgrade, Serbia, 2016)
Synthesis of high-performance alkyd resins (ARs) based on waste poly(ethylene terephthalate) (PET) glycolyzates is presented. PET glycolyzates were synthesized by catalytic depolymerization with trimethylolpropane (TMP) ...
Obtaining and characterization of multilayer nickel thin films electrodeposited with the assistance of ultrasonic agitation / Dobijanje i karakterizacija višeslojnih tankih filmova nikla elektrodeponovanih uz pomoć ultrazvučnog mešanja
(Engineering Society for Corrosion, Belgrade, Serbia, 2018)
Multilayer composite structures of electrodeposited Ni films on polycrystalline copper substrates were fabricated with the assistance of ultrasonic agitation. Alternate ordinary and ultrasonicassisted electrodeposition of ...
Aramid composites impregnated with different reinforcement: Nanofibers, nanoparticles and nanotubes / Aramidni kompoziti impregnisani sa različitim ojačanjima - nanovlakna, nanočestice i nanocevi
(Engineering Society for Corrosion, Belgrade, Serbia, 2014)
In this study, the electrospun nanofibers, nanoparticles and nanotubes were used as reinforcement in order to improve mechanical properties of materials for ballistic protection. The samples of polyurethane/p-aramid ...