Претраживање
Приказ резултата 21-30 од 62
Analytical model of MIS structure in electron devices / Analitički model MIS strukture u elektronskim napravama
(Savez inženjera i tehničara Srbije, Beograd, 2010)
In this paper the new analytical model of MIS (Metal-Insulator -Semiconductor) structure, in microelectron devices, is proposed. Presented model is relatively simple and, at the same time, the results obtained by the ...
Hydroxyapatite coatings on TiO2 nanotubes / Prevlake hidroksiapatita na nanotubama oksida titana
(Engineering Society for Corrosion, Belgrade, Serbia, 2010)
The aim of this work was to obtain nanotubular TiO2 layer by anodization of titanium substrate, and to prepare hydroxyapatite (HAP) coatings by electrophoretic deposition over nanotubular TiO2 layer. The presence of fluoride ...
Welding technology of aluminium alloys using friction stir welding / Tehnologija zavarivanja aluminijumskih legura postupkom zavarivanja trenjem alatom
(DUZS - Društvo za unapređivanje zavarivanja u Srbiji, Beograd, 2010)
The objective of this paper is a development of welding technology of aluminium alloys by Friction Stir Welding (FSW). FSW is a very modern welding process with a great future use, primarily due to a variety of possible ...
Biosorption as a new biotechnology with an aim of protection and balanced use of biodiversity / Biosorpcija kao nova biotehnologija u funkciji očuvanja i uravnoteženog korišćenja biodiverziteta
(Naučno-stručno društvo za zaštitu životne sredine Srbije - Ecologica, Beograd, 2010)
Rapid techno-economic development, without adequate protection of the environment, caused a number of emergence problems: pollution, waste, loss of biodiversity, introduction of invasive species, release of o genetically ...
The current situation in the development of metallurgical engineers high education in the region / Aktuelno stanje u razvoju visokog obrazovanja metalurške struke u regionu
(Institut za bakar, Bor, 2013)
This paper gives an overview on the current situation in the development of metallurgical engineers high education in the region, as well as mutual compliance in example of University of Belgrade, Technical Faculty in Bor; ...
The production of lactic acid on liquid distillery stillage by Lactobacillus rhamnosus ATCC 7469 / Proizvodnja mlečne kiseline na tečnoj destilerijskoj džibri pomoću Lactobacillus rhamnosus ATCC 7469
(Univerzitet u Nišu - Tehnološki fakultet, Leskovac, 2011)
The production of lactic acid on a liquid distillery stillage remaining after the bioethanol production on a mixture of waste bread and waste water from the production of wheat gluten was studied in this work. The lactic ...
Biological activity and ethnomedicinal use of Thymus vulgaris and Thymus serpyllum / Biološka aktivnost vrsta Thymus vulgaris i Thymus serpyllum i njihovo korišćenje u etnomedicini
(Institute for Medicinal Plants Research "Dr. Josif Pancic", 2013)
The Lamiaceae family, which contains about 200 genus and 3000 species, has a cosmopolitan distribution. Plants of this family are rich in essential oils and phenol compounds. Thymus vulgaris (Thyme) is perennial, subshrub ...
SiC synthesis using domestic mineral resources
(University of Novi Sad, 2011)
The possibility of using domestic Mg-silicate (sepiolite, white) as Si source and novolac resin (as carbon source), for synthesis of fine β-SiC powder at relatively low temperatures (1673-1873 K), was demonstrated. Obtained ...
Crystallization behaviour of Li2O·Nb2O5·SiO2 glass containing TiO2
(University of Novi Sad, 2011)
This paper deals with the crystallization of glass 30Li2O·15Nb2O5·50SiO2·5TiO2 (mol%). The crystallization behavior was studied under isothermal and non-isothermal conditions. XRD and SEM methods were employed for determination ...
The electrochemical deposition and corrosion stability of Zn-Mn alloy coatings / Elektrohemijsko taloženje i koroziona stabilnost prevlaka Zn-Mn legura
(Engineering Society for Corrosion, Belgrade, Serbia, 2010)
The influence of the type of the deposition solution on the current efficiency during electrodeposition of Zn-Mn alloys was examined. The Zn-Mn alloys were deposited on steel from chloride, sulphate and pyrophosphate plating ...