Претраживање
Приказ резултата 1-10 од 146
The effect of calcinated hydroxyapatite and magnesium doped hydroxyapatite as fillers on the mechanical properties of a model bisgma/tegdma dental composite initially and after aging
(Savez inženjera metalurgije Srbije, Beograd, 2018)
This study aimed to investigate the possibility of modifying model BisGMA/TEGDMA dental composite by substituting 10 wt. % of conventional glass fillers with bioactive fillers based on calcinated nanosized hydroxyapatite ...
Bisphenol a removal from aqueous solution using fine alpha-fe2o3 particles
(Savez inženjera metalurgije Srbije, Beograd, 2018)
Iron(III) oxide particles (alpha-Fe2O3) were obtained from ferrous chloride (FeCl3 center dot 6H(2)O) precursor using ammonium hydroxide as a precipitating agent and particles were calcined at 700 degrees C for 4 h. ...
The effect of friction stirs welding speed on microstructure, mechanical properties and IGC of EN AW-5083 plates
(Advanced Technologies and Materials, 2019)
The aim of this work was to evaluate the influence of welding speed on microstructure, mechanical properties, as well as Intergranular corrosion (IGC) susceptibility of EN AW-5083 alloy welded using FSW. FSW was performed ...
Micromalting of triticale varieties NS Paun and Odisej
(Faculty of Technology, Novi Sad, 2018)
The objective of this study was to evaluate the possibility of application of two triticale varieties, NS Paun and Odisej, as partial substitutes for barley malt in wort production, based on the triticale analyses, ...
Tensile strength properties of hybrid magnetic composite materials / Zatezna čvrstoća hibridnih magnetnih kompozitnih materijala
(Engineering Society for Corrosion, Belgrade, Serbia, 2017)
The Nd-Fe-B-barium ferrite hybrid composite materials with epoxy matrix presented in this paper cover maximum energy product from 1 to 13 MGOe. Mixture of magnetic particles is responsible for high magnetic quality, while ...
Influence of the Fe(III): Modified clinoptilolite on phosphorus leaching from different soil types / Uticaj Fe(III)- modifikovanog klinoptilolita na izluživanje fosfora iz različitih vrsta zemljišta
(Engineering Society for Corrosion, Belgrade, Serbia, 2016)
Influence of the iron(III)-modified clinoptilolite (FeCLI) on phosphorus leaching from two different Norwegian soil types (sand and clay loam soil) was studied using a column system at room temperature. FeCLI was used in ...
Polyaniline based corrosion inhibitors for conventional organic coatings / Primena polianilina kao inhibitora korozije klasičnih organskih prevlaka
(Engineering Society for Corrosion, Belgrade, Serbia, 2018)
Corrosion protection using conventional coatings is the most used method. Application of polyaniline (PANI) as an inhibitor in conventional coating is based on its proven and well examined protective nature, with motivation ...
Cavitation resistance of turbine runner blades at the hydropower plant 'Djerdap'
(Society for Structural Integrity and Life, Institute for Material Testing, 2017)
Hydropower plants need to develop means of protection of turbine and hydromechanical equipment from undesirable occurrences, such as degradation of parent material and/or weld metal of parts and structures caused by stresses ...
The influence of Mg and Mn content on abnormal grain growth in AA5182 type alloys
(Savez inženjera metalurgije Srbije, Beograd, 2019)
The occurrence of abnormal grain growth (AGG) in AA5182 alloy during annealing imposes severe restrictions on processing parameters and deteriorates mechanical properties. In this work, we investigated the effect of chemical ...
Defect formation during synthesis and welding of silver nanowires for solar cell applications
(Savez inženjera metalurgije Srbije, Beograd, 2019)
Structural defects such as stacking faults and twins, observed in many face-centered cubic (FCC) structured metals and alloys with low stacking fault energies, in general, play an important role in microstructure evolution, ...