Search
Now showing items 31-40 of 149
Integrity assessment of reverse engineered ti-6al-4v eli total hip replacement implant
(Society for Structural Integrity and Life, Institute for Material Testing, 2019)
Total hip replacement implants are used as an artificial replacement for disfunctional hips in order to sustain joint movement. Chosen material and design of total hip replacement are the most influential factors for ...
The characterization of ternary Zn-Ni-Co alloy coatings electrochemically deposited on steel from sulfate solution / Karakterizacija prevlaka trojnih legura Zn-Ni-Co na čeliku elektrolitički taloženih iz sulfatnog rastvora
(Engineering Society for Corrosion, Belgrade, Serbia, 2016)
In this work the electrochemical deposition of ternary Zn-Ni-Co alloy coatings on steel from sulfate, additive-free electrolyte, was investigated. The ratio of metal cations [Co2+]/[Ni2+] in the plating solution was analysed, ...
Indentation behaviour of 'soft film on hard substrate' composite system type / Ponašanje kompozitnih sistema tipa 'mek film na tvrdom supstratu' na testu utiskivanja
(Engineering Society for Corrosion, Belgrade, Serbia, 2015)
This investigation has been carried out in order to analyse and compare the hardness response of different composite systems of the same type, named 'soft film on hard substrate' composite system. Composite systems of mono- ...
Oxidation and erosion behaviour of SiC-HfC multilayered composite
(Univerzitet u Novom Sadu - Tehnološki fakultet, Novi Sad, 2014)
The fabrication of SiC-HfC ceramic composite via self-propagating high-temperature synthesis and simultaneous consolidation was investigated. Dense composite consisting of alternating layers of SiC and HfC was obtained by ...
CO tolerant Pt/Ru0.7Ti0.3O2 nanocatalyst for hydrogen oxidation reaction / Pt/Ru0,7Ti0,3O2 kao nanokatalizator za oksidaciju vodonika i njegova tolerancija na CO
(Engineering Society for Corrosion, Belgrade, Serbia, 2018)
The oxidation of pure H2 and H2/CO mixture (100 ppm CO) was investigated on Pt nanocatalyst supported on Ru0.7Ti0.3O2 (Pt /Ru0.7Ti0.3O2) by linear sweep voltammetry at a rotating disc electrode in 0.1 M HClO4. The results ...
The influence of chloride anions on the pitting corrosion of aluminum alloy en 46000 / Uticaj hloridnih anjona na tačkastu koroziju legure aluminijuma en 46000
(Engineering Society for Corrosion, Belgrade, Serbia, 2018)
The corrosion behavior of AlSi9Cu3 aluminum alloy, which is commonly used for manufacturing radiators of remote central heating systems, is investigated. The tendency for pitting corrosion is investigated in the phosphate ...
Solvatochromism of N-aryl-phenylacetamides / Solvatohromizam N-aril-fenilacetamida
(Engineering Society for Corrosion, Belgrade, Serbia, 2016)
Amide derivates are biologically active compounds and they are widely used in all spheres of life. Therefore, it is very important to know their physical-chemical properties. In this work the influence of characteristics ...
Obtaining and characterization of multilayer nickel thin films electrodeposited with the assistance of ultrasonic agitation / Dobijanje i karakterizacija višeslojnih tankih filmova nikla elektrodeponovanih uz pomoć ultrazvučnog mešanja
(Engineering Society for Corrosion, Belgrade, Serbia, 2018)
Multilayer composite structures of electrodeposited Ni films on polycrystalline copper substrates were fabricated with the assistance of ultrasonic agitation. Alternate ordinary and ultrasonicassisted electrodeposition of ...
Alkyd nanocomposite coatings based on waste pet glicolyzates and modified silica nanoparticles / Alkid nanokompozitni premazi bazirani na otpadnim pet glikolizatima modifikovani nanočesticama silike
(Engineering Society for Corrosion, Belgrade, Serbia, 2016)
Synthesis of high-performance alkyd resins (ARs) based on waste poly(ethylene terephthalate) (PET) glycolyzates is presented. PET glycolyzates were synthesized by catalytic depolymerization with trimethylolpropane (TMP) ...
Analysis of the effects of butt welded joints on a carrying capacity of a structure tank / Analiza uticaja sučeono zavarenih spojeva na nosivost konstrukcije rezervoara
(Engineering Society for Corrosion, Belgrade, Serbia, 2017)
In the present paper, after calculation using the Finite Element Method (FEM), stress distribution on the model of a part of the pressure-tank mantle without welded joints (WJ), with transversal WJ, longitudinal WJ and ...